User's Manual

31
Reset
Fig. 4.3 Reset switch
Cover Placement
•
The cover has two latches on the interior of the top horizontal edge. Place
these latches in the corresponding holes on the top horizontal edge of the
controller base board.
• Once the latches are in place, the bottom portion of the cover will fit easily
over the rest of the controller base board.
• Using the screws (provided in the controller package), secure the cover to the
controller base board along the exterior of the horizontal bottom edge.
Before First Use
The operations must be performed in preparation before the first use:
1. Set the date and time for the controller
2. Set the controller address
a
b
c