Instruction Manual EN-7515C 15” Premium TFT-LCD CCTV Monitor
Please read this manual thoroughly before use, and keep it handy for future reference. SAFETY INSTRUCTION…………………………………………………………………….2 – 3 CAUTIONS ………………………………………..……………………………………………..4 FCC RF INTERFERENCE STATEMENT …………………………………………………….5 CONNECTING WITH EXTERNAL EQUIPMENT…………………………………………… 6 REMOTE FUNCTIONS ……………………………………………………………………….. 7 CONTROLS AND FUNCTIONS…………………………………………………………..8 - 20 MOUNTING GUIDE …………………………………………………………….……..…….. 21 D-SUB CONNECTOR PIN ASSIGNMENTS ……………………………………………….
INSTRUCTION MANUAL…………………………………………………………………………… 1 Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.. 8.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped.
maintenance(servicing) instructions in the literature accompanying the appliance. INSTRUCTION MANUAL…………………………………………………………………………… 3 CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général.
Do not cover the unit or place anything on the top of unit. ▶ AVOID HEAT Avoid placing the unit in direct sunshine or near a heating appliance. ▶ TO ELIMINATE EYE FATIGUE Do not use the unit against a bright back ground and where sunlight or other light sources will shine directly on the monitor. ▶ BE CAREFUL OF HEAVY OBJECT Neither the monitor itself nor any other heavy object should rest on the power cord. Damage to a power cord can cause fire or electrical shock.
the grantee or manufacturer could void the user’s authority to operate such equipment. ▶ DOC COMPLIANCE NOTICE This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the radio interference regulation of Canadian Department of communications. INSTRUCTION MANUAL…………………………………………………………………………… 5 A. SIDE PANEL CONTROL 11 1. DC 12V IN 10 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4.
9. S-VIDEO (Y/C) IN Y/C separated signal input 10. S-VIDEO (Y/C) OUT Y/C separated signal looping output 11. PC STEREO IN 6 …………………………………………………………………………… INSTRUCTION MANUAL B. REMOTE CONTROLLER 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1 / AV2 / S-Video / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode. 5. AV1 Select AV1 mode 6. AV2 Select AV2 mode 7.
Mute the sound. 11. MENU Activates and exits the On Screen Display. 12. EXIT Exit the On Screen Display. 13. VOL( ) Increases or decreases the level of audio volume. 14. UP/DOWN Move to OSD menu. 15. ENTER Accepts your selection or displays the current mode. 16. INFO Input mode information Display. 17. STILL Pause the picture. INSTRUCTION MANUAL…………………………………………………………………………… 1 1 / 2. 2 3 4 5 6 7 VOL Adjust the volume / Adjust menu settings. 3 / 4.
Activates and exits the On Screen Display. 7. POWER ON/OFF( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 8. IR Sensor Remote controller sensor. 9. POWER LED The power LED(next to the power switch) lights with green when the power is turned ON. The power is turned off by pressing the power switch again and the power LED goes Red.
Press the up(▲) / down(▼) button to select Custom sub menu. Press the left(◀) /right(▶) button to adjust picture setting. Press the MENU button to save. Brightness: Increase or decrease the intensity of the image. Contrast: Increase or decrease the intensity (lightness or dimness) of the image. Color: Increase or decrease the colour of the picture. Tint: Increase or decrease the tint of the picture. Sharpness: Increase or decrease the sharpness of the picture.
Press the up(▲) / down(▼) button to select Custom sub menu. Press (◀) /right(▶) button to adjust picture setting. Press the MENU button to save. 10 …………………………………………………………………………… INSTRUCTION MANUAL B. Picture / Sound Menu(Only Video mode) Press the MENU button and then up(▲) / down(▼) button to select the Picture / Sound. Press the right(▶) or ENTER button. 1.
Press the up(▲) / down(▼) button to select the Picture Mode. Press the right(▶) or ENTER button and then press up(▲) / down(▼) button to select the desire Picture Mode. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 2. Color Tone Press the up(▲) / down(▼) button to select the Color Tone.
Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired color tone. Press the MENU button to save. 12 …………………………………………………………………………… INSTRUCTION MANUAL 3. Mute Press the up(▲) / down(▼) button to select the Mute.
Press the (▶) or ENTER button and then up(▲)/down(▼) button to select the desired Mute. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 4. Volume Press the up(▲) / down(▼) button to select the Volume. Press (◀) /right(▶) button to adjust Volume. Press the MENU button to save.
5. PC (Only PC mode) Press the up(▲) / down(▼) button to select the PC Press the ▶ or ENTER button 14 …………………………………………………………………………… INSTRUCTION MANUAL Press the up(▲) / down(▼) button to select PC sub menu Press the right(▶) or ENTER button and then left (◀) /right(▶) button to adjust PC setting. Press the MENU button to save. Auto Adjust: Auto geometry adjustment Phase: Adjust the number of horizontal picture elements. H. position: Move image horizontally on screen right or left. V.
C. SETUP MENU Press the MENU button and then up(▲) / down(▼) button to select the Setup menu. Press the right(▶) or ENTER button. INSTRUCTION MANUAL…………………………………………………………………………… 1.Reset Press ENTER button to select the reset Reset: Select to reset all setting to the factory default values.
16 …………………………………………………………………………… INSTRUCTION MANUAL 2. Language Press the up(▲) / down(▼) button to select the Language menu. Press the right(▶) or ENTER button.
Press the up(▲) / down(▼) button to select language. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 3. OSD Tone Press the up(▲) / down(▼) button to select the OSD tone menu.
Press the up(▲) / down(▼) button to select the desire OSD Tone. Press the MENU button to save. 18 …………………………………………………………………………… INSTRUCTION MANUAL 4. Blue Screen Press the up(▲) / down(▼) button to select the blue screen. Press the right(▶) or ENTER button.
Press the up(▲) / down(▼) button to select on or off. Press the MENU button to save. INSTRUCTION MANUAL…………………………………………………………………………… 5. Key Lock Press the up(▲) / down(▼) button to select the key lock menu.
Press the up(▲) / down(▼) button select on or off Press the MENU button to save. 20 …………………………………………………………………………… INSTRUCTION MANUAL Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation 1.The Monitor fixing bracket to the monitor using the fixing screws provided. 2.
INSTRUCTION MANUAL…………………………………………………………………………… ▶ PIN ASSIGNMENTS 21
▶ ACCESSORY 2. Power Cord 1. User’s Manual 3. Remote Control Unit And Battery 4. VGA Cable 22 …………………………………………………………………………… INSTRUCTION MANUAL This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal.
SUSPEND < 11W ACTIV OFF < 8.5W LED INDICATOR The power management feature of the monitor is comprised of four stages: On(Green), Standby, Suspend, Active off(Red on/off 1 sec) and Unsupported mode(Green). MODE LED COLOR ON GREEN STANDBY MONITOR OPERATION Normal Operation RED ON/OFF 1 SEC Screen blanks after preset idle time And some electronic circuits or all Circuitry in the monitor shut down.
PC Stereo in 304.1 mm x 228.1 mm PACKING DIMENSIONS (W x D x H) WEIGHT POWER SUPPLY (Electrical Ratings) 440mm X 160mm X 390mm (17.3”x 6.3“x 15.4’) Net Weight : 4.8Kg (10.6Ibs) Gross Weight : 6.26Kg (10.6Ibs) DC 12V/ 3A (AC110~220V,50~60HZ for Auto switching) ▶▶ NOTE : Technical specifications are subject to change without notice.
WEEE Symbols Correct Disposal of This Product (Waste Electrical &Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature,indicates that it should not be disposed with other household wastes at the end of its working life.
Taiwan - Headquarter Office China - Beijing Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Room 609,Technology Trade Building.
