Instruction manual

110
8 EVERFOCUS DDNS SETUP
Setup Steps:
Step 1. Set up the Network Menu according to the instructions detailed in the Networking chapter.
(Make sure that DNS Server 1 is set correctly or DDNS will not work)
Step 2. Go to the website http://everfocusddns.com and check for an available name.
Note: This step is optional, as it is only used to check the availability of host name. If
the name is available, proceed to step 3 for DDNS setup.
Step 3. In DVR’s Network Menu, go to DDNS. Choose “EverfocusDDNS” for the Server and put in
your chosen name for DVR Name.
Step 4. Press “Submit/Update” button to confirm.
Step 5. After several seconds you should receive a “Success” window. If it gives an error message
instead, check your network settings and the hostname and then try again.
Step 6. You should now be able to connect by typing the name you created into the address bar.
Example: http://hostname.everfocusddns.com
Chapter
8