Instruction manual

7
6) SEQ: Sequence key for automatic switching of a defined camera sequence
7) ZOOM: 2x electronical zoom.
For details please consult chapter 4.11 ZOOM.
NOTE: The Zoom key is only active in Full screen at Main monitor.
8/9) MONITOR: The MONITOR key switches operation between MAIN and CALL. Theactive screen will
be Main monitor when LED is in “M”and Call monitor when LED is in “1”. For more details, please refer to
Chapter 4.10 MONITOR .
10) SEARCH: The SEARCH key opens the SEARCH menu, details in chapter 4.12 SEARCH.
11) COPY: The COPY key opens the menu for video data export, details in chapter 4.13 COPY.
12) IR Receiver: Receiver for IR remote control
13) HDD1: Removable SATA HDD #1 (only for HD removable model)
14) Key lock: Lock for hard disk door (only for HD removable model)
15) HDD2: Removable SATA HDD #2 (only for HD removable model)
16) REC: RECORD key for manual start of recording / recording standby (event recording).
LED will be ON if DVR is recording or in record standby
17) STOP: STOP key for Playback and Record
18) BACK: Reverse Playback key
19) PAUSE: Image freeze in playback mode
20) PLAY: Playback key
21) ENTER: Enter Key for menu operation and alarm acknowledge Turn camera audio ON/OFF when
viewing full screen camera. For more details, please refer to Chapter 3.2.1.
22) MENU/ESC: Used to bring up Main Menu or exit from sub-Menus.
23) JOG/SHUTTLE: Shuttle (outer wheel): In playback mode, use the SHUTTLE for fast forward /fast
reverse playback.