Instruction manual

21
3 MOUSE AND FRONT PANEL OPERATION
Paragon series DVR supports multiple sources to control the DVR. It can be controlled with a mouse, the
front panel, an EKB500, the handheld remote control, or serial command from RS232 port.
This chapter will cover the basic operation using mouse and front panel.
3.1 GENERAL USB MOUSE OPERATION
3.1.1 How to select a channel / Enable audio
1. In a view consisting of more than one channel, user can select a channel by clicking once on desired
channel screen. The selected screen will be highlighted by white frame.
2. Double clicking on a channel screen will display full screen of this channel.
3. Click the audio icon ( ) at the bottom of the screen to scroll through active audio for each camera.
Only one audio channel can be active at a time.
3.1.2 OSD Root Menu
1. Right-click the mouse to bring up the Root Menu bar (see Figure 3-1 OSD Root Menu ). When you move
the mouse over each icon, the appropriate title will be displayed on top of the control bar.
Figure 3-1 OSD Root Menu
2. Click on any icon to perform that action. These actions are covered in detail in Chapter 4.
3. Click the “X”in the top-right corner to close the Menu bar.
Chapter
3