Instruction manual

33
4.7 CHANNEL SWITCHING
Use this function to change channel position
1. Select one camera
2. Press Channel button .
3. Click on the channel number you wish to switch on channel bar. The display of channel will be switched.
EX: Select camera1 and enter Channel menu and choose “2”, than camera1 will show on position of
camera2, camera2 will show on position of camera1
4.8 DISPLAY
1. Press Display button on menu by using mouse or press “Display” button on the front panel.
2. Press once to show camera information. The following table describes each icon.
Recording
Playback
Fast forward
Fast backward
Back
pause
Alarm
Motion
Video loss
Express copy
Audio out
3. Press again to show status information. The following table describes each icon.
Alarm
Audio 1~16
Control call monitor
Event
Fan failure
HD failure
HD temp. too high
Monitor 1 status
Motion
New firmware
No network
Record in HD1
Record in HD2
Seq.
Video loss
4. Press again to showboth status information and camera information.
5. Press again to hide all information.