Instruction manual

43
DHCP: DHCP server in LAN will automatically assign IP for network connection.
PPPoE: For direct DSL connection ONLY. Check with your ISP if they use PPPoE.
IP Address: This field shows the current IP Address for the DVR. A Fixed IP address must be set
manually. If DHCP or PPPoE is selected, this value will be assigned automatically.
Subnet Mask: This field shows the subnet mask for your network so the DVR will be recognized within the
network. If DHCP or PPPoE is selected, this value will be assigned automatically.
Gateway: This field shows the gateway for your network so the DVR will be recognized within the network.
If DHCP or PPPoE is selected, this value will be assigned automatically.
Apply: Press “Apply” button to save and apply Express settings to DVR. The following message will pop up.
Press “Yes” to accept changes and the system will automatically adjust recording rate according to settings.
5.3 CAMERA SETTING
Figure 5-2 is a screen shot of the CAMERA SETTING MENU. This menu is used to configure individual
camera settings.
Figure 5-2 Camera Menu-Basic Setting