Spec Sheet

P/N: 46051PAL202002A
Introduction
The Rack Mount Bracket BA-PX12 is specially designed for PALUNII TX (Green). Up
to 12 units of PALUNII TX can be installed on the bracket. Before installing, please
ensure you have the following items in the package.
Rack Mount Bracket BA-PX12 x 1
Small Screw
(Black) x 24
Screw with
Washer x 2
Suggested Installation Steps
1. Screw a PALUNII TX (Green) on the Bracket with the supplied 2 Small Screws.
Up to 12 units can be installed.
Suggested Installation
2. Connect a BNC and Network cable to the PALUNII TX.
3. Screw the Rack Mount Bracket on the rack mount cabinet tightly with the
supplied 2 Screws with Washers.
a. For rack mount cabinet with screw holes, you can simply use the Screws
without
Washers.
Rack Mount Bracket
Screw without Washer
PoE Switch
Screw without Washer
b. For rack mount cabinet with no screw holes but mounting holes, use the
Screws with Washers.
Screw with Washer Rack Mount Bracket Screw with Washer
PoE Switch