EBD935 eZ.HD Series 720p Analog High Definition True Day/Night Outdoor IR Ball Camera User’s Manual Copyright © EverFocus Electronics Corp, Release Date: Nov.
Precautions 1. Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. 2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.
Safety Notice Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contents 1. Introduction...................................................................................................................... 5 1.1 1.2 Packing List ..................................................................................................................... 5 Features .......................................................................................................................... 5 2. Cable Description ...................................................................
EBD935 eZ.HD IR Ball Camera 1. Introduction The EBD935 ball camera is equipped with a 1/2.8" SONY 1.37M pixels CMOS sensor and providing resolution of 720p. Featured with the Digital Wide Dynamic Range (D-WDR) function, the camera can provide clear images even under back light circumstances where intensity of illumination can vary excessively. The EBD935 comes with 36 IR LEDs, supporting up to 30m (~100ft.) IR distance in night vision. The camera can work in both indoor and outdoor environments.
EBD935 eZ.HD IR Ball Camera 2. Cable Description No. Name Descriptions 1 Power Cable Connects to a 12VDC power source. 2 Dual Video Output 720p and 960H output, using a 75 Ohm BNC-type coaxial cable. 3 DC Power Pigtail Cable Optional power pigtail cable. The red wire is positive (+); while the black wire is negative (-).
EBD935 eZ.HD IR Ball Camera 3. Installation 3.1 Installation and Adjustment 1. For Ceiling Mount / Wall Mount users: Stick the Template Plate on the position where you want to attach the camera. 2. Drill four holes and insert the supplied Plastic Anchors into the holes. If you wish to run the wires into the wall, then drill the circle in the middle of Template Plate.
EBD935 eZ.HD IR Ball Camera 3. Unscrew the outer housing by twisting it counterclockwise and then remove the outer housing from the camera base. 4. Screw the base plate to the wall or ceiling with supplied four Screws and Hexagon Wrench. a. If you want to wire the cables from the side cut of the camera base, attach the camera body to the base plate and run the cables through the camera base first, then screw the camera base to the ceiling / wall.
EBD935 eZ.HD IR Ball Camera b. If you want to wire the cables through the wall, attach and screw the camera base to the ceiling / wall. Then attach the camera body to the base plate. 5. Connect the camera to the 12V DC power source using the supplied DC Power Pigtail Cable or power adapter. 6. Connect the camera to an AHD DVR or a portable monitor using the video output cable for viewing the video image while adjusting camera angles. To configure camera settings using the OSD Menu Joystick.
EBD935 eZ.HD IR Ball Camera Note: The function button is not only for direction control, also for switching video format and video output. Please follow the detailed instruction as below: Push the joystick "DOWN" button key over 5 seconds to switch video format from PAL to NTSC. Push the joystick "LEFT" button key over 5 seconds to switch video output from 720p to 960H (720p is the default). Push the joystick "RIGHT" button key over 5s to switch video output from 960H to 720p. 7.
EBD935 eZ.HD IR Ball Camera 9. Screw the three set screw by using the supplied Hexagon Wrench.
EBD935 eZ.HD IR Ball Camera 4. Configuration in the OSD Menu You can use the Joystick on the rear panel of the camera to configure camera settings in the OSD menu. For details on the OSD menu structure as below: No. Main Sub Menu Sub Menu / Function Indoor Min Shu. 1 Lens DC* Mode NTSC: 1/30* PAL: 1/25* NTSC: 1/60,FLK,1/240, 1/480,1/1000, 1/2000,1/5000*, Outdoor* Max. Shu.
EBD935 eZ.
EBD935 eZ.HD IR Ball Camera D-effect Freeze Off*/On Mirror Off*, Mirror, V-flip, Rotate Neg. Image Off*/On Off* Select Display Area1*,Area2,Area3,Area4 Position, Size,↑, ↓,→,← On* Off Sensitivit y Motion On 0-100(64*) Color Green*, Blue, White, Red Trans 1.00*,0.75,0.50, 0.
EBD935 eZ.
EBD935 eZ.HD IR Ball Camera 5. Specifications P/N EBD935 Pickup Device 1/2.8" SONY 1.37M pixels CMOS Video Format NTSC and PAL( can be switched via OSD) Picture Elements 1280 (H)*720 (V) Scanning System Progressive Scan Sensitivity 0 lux with IR on S/N Ratio Over 48dB (AGC off) Electronic Shutter AUTO, Manual (X30~1/ 50000), FLK Video Output BNC 1.0 Vp-p ,75ohm Gamma Correction 0.45 Lens Type 2.
EBD935 eZ.HD IR Ball Camera EverFocus Electronics Corp. EverFocus Taiwan: 12F-1, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, New Taipei City, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 3943 www.everfocus.com.tw marketing@everfocus.com.tw EverFocus Europe - Germany: Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49 2822 93940 FAX: +49 2822 939495 www.everfocus.de sales@everfocus.