EDH5102 1080p Mini Dome Camera User’s Manual Copyright © EverFocus Electronics Corp, Release Date: October, 2012
Cautions 1. Do not install the camera near electric or magnetic fields. 2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein. 3. Try to avoid facing the camera toward the sun. 4. Keep the power cable away from water and other liquids and never touch the power cord with wet hands. 5. Never install the camera in areas exposed to oil, gas or solvents. 6.
Contents 1. INTRODUCTION....................................................................................1 1.1 PACKING LIST ....................................................................................................... 1 1.2 FEATURES ......................................................................................................... 1 2. CABLE DESCRIPTION..........................................................................2 3. INSTALLATION .........................................
EDH5102 1080p Mini Box Camera 1. Introduction The EDH5102 is an HDcctv indoor mini dome camera. Based on a progressive scan CMOS sensor, the camera provides 1080p high resolution images and superior video quality compared to traditional CCTV images.
EDH5102 1080p Mini Box Camera 2. Cable Description No. Name Descriptions 1 Power Cable Connects to a DC 12V power source. 2 HDcctv Output Connects to an HDcctv device, such as a DVR or HD monitor, using a 75 Ohm BNC-type coaxial cable. 3 RS485+ (Green) Connects to an RS-485 device, such as EverFocus’ EKB500 keyboard. 4 RS485- (Blue) Connects to an RS-485 device, such as EverFocus’ EKB500 keyboard. 5 Test-Out Connects to a SD CVBS monitor for setting image aim and focus.
EDH5102 1080p Mini Box Camera 3. Installation 3.1 Installation and Adjustment 1. 2. Stick the mounting template on the position where you want to attach the camera. Drill the two holes on the template for screwing the camera with the supplied screws and anchors, and the circle in the middle only if you want to wire the cables through the wall / 3. 4. ceiling. Insert the supplied anchors into the holes. Remove the cover cap from the camera body. 5.
EDH5102 1080p Mini Box Camera 6. Connect the camera to the 12V DC power source using the supplied power adapter pigtail or a power adapter. 7. Connect the camera to a DVR or a portable monitor using the Test-Out cable for viewing the camera view while adjusting camera angles. You can also use the OSD Menu Joystick to configure camera settings. a. Adjust camera angles by tilting or rotating the camera. b.
EDH5102 1080p Mini Box Camera 8. 4. Screw the camera cover cap back to the camera. Configuration in the OSD Menu You can use the Joystick on the rear panel of the camera to configure camera settings in the OSD menu. For details on the OSD menu structure, see OSD Menu Structure in Appendix. 4.1 OSD Menu Press the Enter / Confirm button on the Joystick. The Setup Menu in the OSD appears. 4.1.1 Exposure Press the Enter / Confirm button to enter the submenu.
EDH5102 1080p Mini Box Camera MODE Indoor Select this mode when the color temperature of the video image is similar to that found in indoor environments (around 5100 to 5300°K). Outdoor Select this mode when the color temperature of the video image is similar to that found in outdoor environments (around 3,000°K to 3,200°K) LENS You can select the type of the lens. Two types are available: Manual and DC. By default, the Manual type lens is selected.
EDH5102 1080p Mini Box Camera • • • • AUTO – Around 2500 to 9500°K AUTO EXTN (Extension) – Around 2300 to 10800°K PRESET – Use a pure white background to preset the white balance value. MANUAL COLOR TEMP – Use the and buttons to adjust the speed. The options include: LOW, MIDDLE and HIGH • R-GAIN and B-GAIN –The options include: 0~20. CHROMA Use the and buttons to increase or decrease the CHROMA from 0 to 20.
EDH5102 1080p Mini Box Camera PRIVACY Enter the submenu to set up the privacy masks; up to 31 zones can be created: ON ZONE NO: Use the and buttons to select the zone from 0 to 31. X, Y-POS, SIZ: Enter the submenu to set up the position or size of the privacy mask zone. COLOR: Press to select a color for the selected privacy mask zone. TRANS: Press to select the transparency of mask zone. SHADING Turn it on to offset diminished light transmission through lens periphery for uniform image illumination.
EDH5102 1080p Mini Box Camera MODE Use the and buttons to select OFF and BLC. BLC OSD, POS and SIZ Select OFF to disable the BLC function, or select ON to enable the BLC function and for further setup. After selecting an area block, enter the BLC POS / SIZ and X / Y setup page, a “POSITION” sign displayed on the screen. Use the direction buttons to move the area to the desired position. Press the Enter / Confirm button to confirm the position, a “SIZE” sign displayed on the screen.
EDH5102 1080p Mini Box Camera 4.1.6 Motion Press the Enter / Confirm button to enter the submenu. RESOLUTION Use the and buttons to increase or decrease the RESOLUTION level from 0 to 4. SENSITIVITY Press to set up the sensitivity for the motion detection function. WINDOW TRANS Press to select the transparency of motion detect zone. WINDOW USE, POS and SIZ Select OFF to disable this function, or select ON to enable and for further setup.
EDH5102 1080p Mini Box Camera 4.1.7 System Press the Enter / Confirm button to enter the submenu. DEFECT DET Press to select the DPC (Defective Pixel Correction) level of defect detector. Please notice; do not use this function without cover the lens. The camera will automatically correct pixel defects. Misoperation will cause the abnormal image. CAM TITLE Switch to On and then enter the submenu to set up a camera name displayed on the screen.
EDH5102 1080p Mini Box Camera 50HZ frequency, the CVBS will automatically change to PAL; select 60HZ frequency, the CVBS will turn to NTSC. Then, you can select the 720P or 1080P in the format options, and the FPS will also change accordingly. LANGUAGE Select a language for the OSD text. Options include English, French, German, Simplified Chinese, Korean and Japanese. RESET Turn it on to reset the settings. F / W VERSION: Firmware Version Press to display the firmware version of the camera.
EDH5102 1080p Mini Box Camera 5. Specifications Pickup Device 1/3” Panasonic 2.1 megapixel Color Progressive CMOS sensor Image Pixels 1920(H) x 1080(V) Resolution Digital: 1080p (30 / 25), 720p (60 / 50) Scanning System NTSC / PAL Sensitivity Color: 0.4 lux, BW: 0.1 lux, Color DSS: 0.1 lux, BW DSS: 0.025 lux S/N Ratio Digital (HDcctv Output): BT.
EDH5102 1080p Mini Box Camera 6. Appendix 6.1 OSD Menu Structure The default value is marked with a star “*”. No.
EDH5102 1080p Mini Box Camera SHADING ON*, OFF AUTO* MODE DAY&NIGHT COLOR B&W AGC THRS 0~20 (default=10) MARGIN 0~20 (default=) DELAY 0, 5*, 10, 30 SEC OFF* HLMASK 4 5 BLC 3D-DNR ON LEVEL 0~20 (default=10) COLOR BLK*/WHT/YEL/CYN/GRN/MAG/RED/BLU CTB ON, OFF* GAMMA 0.45*, 0.5, 0.55, 0.65, 0.
EDH5102 1080p Mini Box Camera DOUT FORMAT 720P, 1080P* DOUT FPS 50, 60 ,25*, 30 FREQ 50*, 60 HZ CVBS PAL*, NTSC LANGUAGE English, Simplified Chinese, Japanese, Korean, French, German RESET PUSH, PUSHING 16
EDH5102 1080p Mini Box Camera EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 2380 www.everfocus.com.tw marketing@everfocus.com.tw EverFocus Europe - Germany: Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49 2822 93940 FAX: +49 2822 939495 www.everfocus.de info@everfocus.