INSTRUCTION MANUAL EDSR-400 4 Channel Duplex Digital Video Recorder EDSR-600 6 Channel Duplex Digital Video Recorder V1.
Safety Precautions CAUTION DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . Safety Precautions ? Refer all work related to the installation of this product to qualified service personnel or system installers. ? Do not block the ventilation opening or slots on the cover. ? Do not drop metallic parts through slots.
Safety Precautions Safety Precautions The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ”dangerous voltage”within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instructions in the literature accompanying the appli
Important Safeguards Important Safeguards Read Instruction---All the safety and operating instructions should be read before the init is operated Retain Instructions---The safety and operating instructions should be retained for future reference. Heed Warnings— All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions— All operating and use instructions should be followed Cleaning— Unplug the unit from the outlet before cleaning.
Table of Contents 1. Product Overview… … … … … … … … … … … … … … .… … … … … … ..… ..… ..Page 1 1.1 Main features… … … … … … … … … … … … … … … … … … … … … … … … … .....… ..… .1 1.2 Specifications… … … … … … … … … … … … … … … … … … … … … … … … ..… … … … ..2 2. Back panel connections… … … … … … … … … … … … … … … … … ......… … … 3~4 3. System connection… … … … … … … … … … .… … … … … … … … … … … … … … … ..5 Before installation… … ..… … … … … … … … … … … … … … … … … … … … … … … … … … ..5 4.
Product Overview 1. Product Overview The EDSR400/EDSR600 Duplex Digital Video Recorder (DVR) a full-featured DVR designed specifically for use in security industry. The DVR incorporates all the benefits of digital video recording, is simple to install, and operates just like a VCR. Highly efficient compression technology and superior resolution of recorded images make the DVR stand out from the competition as the best choice for security surveillance.
Specifications 1.
Back Panel Connections 2. Back Panel Connections EDSR-600 5 4 6 8 7 5 EDSR-400 6 7 10 9 8 4 9 1 2 3 11 12 13 2 3 10 12 11 1 13 1 ON/OFF: Main on/off switch. 2 AC100~240V power socket. 3 VIDEO IN: BNC-sockets for composite signal video inputs, automatic 75 Ohm termination. (EDSR400:1~4, EDSR600: 1~6) 4 VIDEO OUT: Loop through video outputs for each input channel. (EDSR400:1~4, EDSR600: 1~6) 5 CALL MONITOR: BNC-socket Call (Spot) Monitor, composite signal.
Back Panel Connections 9 ALARM I/O: (Refer pin assignment in Appendix-D, Page 44) ALM-INPUT : Normally Open (N.O) or Normally Close (N.C) type alarm sensor input. The Alarm Input can be selected as N.O or N.C input in the setup menu. When an alarm occurs, alarm recording will automatically start. ALM-OUTPUT : Two-way contact relay alarm output. In normal condition, this N.C. contact shorted to ALM-COM. In alarm status, it is open between ALM-NC and ALM-COM, N.O. is shorted to ALM-COM.
System Connection 3. System Connection The installations described below should be made by qualified service personnel or system installers. Before Installation Please refer to the following diagram for the system connections.
Front Panel Keypads 4. Front Panel Keypads 12 11 EDSR-600 10 2 1 22 9 8 7 6 5 4 3 13 14 15 16 17 18 19 20 21 2 EDSR-400 1 SHUTTLE Ring and JOG Dial SHUTTLE : In Playback mode, turn the shuttle ring to fast forward/rewind the picture (600X maximum). In Pause mode, turn the shuttle dial to slow forward/rewind the picture (1/32 maximum). JOG : 2 CHANEL KEYS:. In Pause mode, turn the jog dial to step forward/rewind the Picture. In Menu mode turn the jog dial to select options.
Front Panel Keypads In Full screen mode this menu allows color adjustment for each video channel, all channels are separately adjustable. The selected item will show in red color bar. Use JOG to increase or decrease the value. Press ENTER to confirm and move to next item. After finished setting, press SELECT key to discard change or press MENU key to save and exit the dialog. In Multi-screen mode: In Multi-screen mode the SELECT key allows to define cameras in all multi-screen views. Press SELECT.
Operation 5. Operation (1) Insert a HDD (IDE) for Video Storage Insert one or two HDD (3.5” IDE) for Video Storage. The HDD should be set as Master. (Set Cable Select is also available) (Normally the default setting of HDD is Master) Note: After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position.Otherwise, HDD will not be detected.
MENU flow 6. MENU FLOW CLOCK ( See page 11 ) TITLE RECORD ( See page 14 ) ( See page 19 ) TITLE SETTING MENU RECORD SETTING MENU CLOCK SETTING MENU CH TITLE 1 CH01:_ _ _ _ _ 2 CH02:_ _ _ _ _ 3 CH03:_ _ _ _ _ 4 CH04:_ _ _ _ _ (5 CH05:_ _ _ _ _ ) ( 6 CH06:_ _ _ _ _ ) : 2004/2/27 FRI : 13:01:02 DATE TIME MENU LANGUAGE: ENGLISH VIDEO SYSTEM: NTSC VERSION: 1.
MENU flow BUZZER DISK ( See page 22 ) ( See page 25 ) BUZZER SETTING MENU BUZZER : ENABLE SYSTEM SETTING MENU DISK USAGE HDD-1 HDD-2 RECORD-IN : ON SIZE (GB) : 160 ALARM-IN RECORD POS : *67.8% MOTION-IN : ON PLAY POS : *34.
MENU 6.1 CLOCK SETTING MENU CLOCK SETTING MENU DATE : 2004/02/27 FRI TIME : 13:01:02 : ENGLISH MENU LANGUAGE : NTSC VIDEO SYSTEM VERSION: 1.
MENU 6.
MENU 6.3 SEQUENCE SETTING MENU SEQUENCE SETTING MENU CH OP DWELL 1 2 3 4 (5 (6 03 SECS 03 SECS 03 SECS 03 SECS 03 SECS) 03 SECS) ON ON ON ON ON ON Columns in brackets () only valid for EDSR-600 In the SEQUENCE SETTING MENU, we define for MAIN Monitor (1) CH (Channel): Input channels 1~4 for EDSR400, 1~6 for EDSR600. (2) OP (Operation): ON includes the camera in the sequence, OFF skips the camera in the sequence. (3) DWELL (DWELL TIME) : Dwell Time is individual adjustable for each channel.
MENU 6.4 TITLE SETTING MENU TITLE SETTING MENU CH TITLE 1 2 3 4 (5 (6 CH01:_ _ _ _ _ CH02:_ _ _ _ _ CH03:_ _ _ _ _ CH04:_ _ _ _ _ CH05:_ _ _ _ _ ) CH06:_ _ _ _ _ ) Columns in brackets () only valid for EDSR-600 In TITLE SETTING MENU , we define: The Title Setting Menu allows you to assign a title to each camera input. Title with up to 12 characters is supported in each channel. The available alphanumeric characters are: 0,1,2,3,4,5,6,7,8,9, A,B,C,D,… X,Y,Z. /( ).
MENU 6.5 COVERT SETTING MENU COVERT SETTING MENU CH OP 1 2 3 4 (5 (6 OFF OFF OFF OFF OFF) OFF) Columns in brackets () only valid for EDSR-600 In COVERT SETTING MENU , we define: The covert setting menu allows you hide the desired camera on the display in a blue background. Change setting to ON for covering camera. Camera is not visible in Live and Playback mode, unless this function is deactivated in COVERT menu. Default setting is OFF for all cameras.
MENU 6.6 ALARM RECORD SETTING MENU ALARM SETTING MENU CH OP TYPE DURATION 1 2 3 4 (5 (6. N.O N.O N.O N.O N.O N.O ON ON ON ON ON ON RST ON 05 SECS 05 SECS 05 SECS 05 SECS 05 SECS) 05 SECS) N.O Columns in brackets () only valid for EDSR-600 In ALARM RECORDING MENU, we define (1) CH (Alarm input) : Select alarm input or RST for alarm reset input. (2) OP (OPERATION) : ON : Records when alarm occurs. OFF : No reaction when alarm occurs. (3) TYPE : Select alarm type: N.C.
MENU 6.7 MOTION SETTING MENU MOTION SETTING MENU CH OP SEN 1 2 3 4 (5 (6. HIGH 05 SECS HIGH 05 SECS HIGH 05 SECS HIGH 05 SECS HIGH 05 SECS) HIGH 05 SECS) ON ON ON ON ON ON DURATION Press 1~6 TO MANUAL EDIT Columns in brackets () only valid for EDSR-600 In the MOTION RECORD SETTING MENU, we define (1) CH (Channel) : Video input channel (2) OP (Operation) : Default: OFF ON: The device will respond recording when motion occurs. OFF: The device will not respond recording when motion occurs.
MENU (5) Press 1-4/6 TO MANUAL EDIT: Use the numeric keys (1~4 for EDSR-400 / 1~6 for EDSR-600) to select a camera for setting the detection areas. The selected camera appears with a 16 x 12 grid (detection zones): Follow the Dialog for further operation. PRESS ENTER TO SELECT NODE USE JOG TO TOGGLE ON/OFF PRESS MENU TO EXIT Turn the JOG dial clockwise or counter-clockwise to switches zone ON – active (area filled) or OFF – inactive (area empty) for motion detection.
MENU 6.8 RECORD SETTING MENU RECORD SETTING MENU NORMAL RECORD : 50 IPS SPEED : STANDARD QUALITY : REWRITE DISK FULL ALARM RECORD ON OPERATION : 50 IPS SPEED : STANDARD QUALITY PRE-ALARM RECORD ON OPERATION In NORMAL RECORDING MENU, we define (1) NORMAL RECORD: SPEED : To set the normal recording speed. Maximum 60 (NTSC) / 50 (PAL). QUALITY: Video recording quality setup for setting the quality of the vi deo picture by selecting a compression rate.
MENU 6.9 NETWORK SETTING MENU NETWORK SETTING MENU IP ADDRESS NET MASK ADDRESS GATEWAY ADDRESS MAC ADDRESS USER-NAME GUEST--GENERALADMIN--- : 192.168.010.005 : 255.255.255.000 : 192.168.010.001 : 00:5A:56:A3:87:1A PASSWORD GUEST--GENERALADMIN--- LEVEL GUEST--GENERALADMIN--- In the NETWORK SETTING MENU, we define (1) IP ADDRESS : Assign an fixed IP address for this unit, for example:192.168.010.005 (2) NET MASK ADDRESS: Assign a subnet mask of the network for this unit, for example:255.255.255.
MENU 6.10 CONTROL SETTING MENU CONTROL SETTING MENU RS232 BAUD RATE RS232 STOP BIT RS232 PARITY RS232 DATA BIT : 9600 BPS :1 : NONE :8 RS485 BAUD RATE RS485 STOP BIT RS485 PARITY RS485 DATA BIT : 9600 BPS :1 : NONE :8 RS232/RS485 ID : 001 In the CONTROL SETTING MENU, we define (1) RS232 BAUD RATE: There are 6 different speeds that can be used to transmit instruction or information through the RS232 port on the device, 1200 baud,2400 baud,4800 baud,9600 baud, 19200 baud,and 3840 baud.
MENU 6.11 BUZZER SETTING MENU BUZZER SETTING MENU BUZZER : ENABLE RECORD-IN : ON ALARM-IN : ON MOTION-IN : ON DISK FULL : ON VIDEO LOSS : ON TIMER : ON In BUZZER SETTING MENU, we define the buzzer ON/OFF for following event: RECORD-IN, ALARM-IN, MOTION-IN, DISK FULL, VIDEO LOSS AND TIMER Turn the JOG dial clockwise or counter-clockwise to select the options. Press ENTER key to confirm the option and move to next column.
MENU 6.12 ARCHIVE SETTING MENU ARCHIVE SETTING MENU : 720 X 480 : ON : TOP : ON : TOP PICTURE SIZE TIME STAMP TIME STAMP POS WATER MARK WATER MARK POS In the ARCHIVE SETTING MENU, we define for picture and movie export to CF-card: (1) PICTURE SIZE : Selects picture size for copying image to CF card: Big size:720x480 / 720x576 for NTSC / PAL. Small size:352x240 / 352x288 for NTSC / PAL. (2) TIME STAMP : ON: Shows the time stamp on the picture when copying image to CF card.
MENU 6.13 CALL MONITOR SETTING MENU CALL MONITOR SETTING MENU CH DWELL EVENT 00 00 00 00 (00 (00 07 SECS 07 SECS 07 SECS 07 SECS 07 SECS 07 SECS NONE NONE NONE NONE NONE) NONE) Columns in brackets () only valid for EDSR-600 In the CALL MONITOR SETTING MENU, we define the sequences of each CH for call monitor . CH, DWELL, EVENT: (1) CH (Channel): Select the camera to be shown in the standard sequence of this call monitor. With setting “00” the channel will be skipped in the sequence.
MENU 6.14 DISK SETTING MENU DISK SETTING MENU DISK USAGE HDD-1 HDD-2 160 SIZE (GB) : 160 RECORD POS : * 30.7% 0% PLAY POS : *30.7% 0% DISK RENEW: NO NO In the DISK SETTING MENU, we define (1) (2) (3) (4) (5) DISK USAGE: HDD-1, HDD-2 SIZE: Applied HDD size. RECORD POS: HDD usage rate, record position, “*” shows the active HDD PLAY POS: current playback position, “*” shows the active HDD DISK RENEW: Erase HDD-1, HDD-2 Turn the JOG dial clockwise or counter-clockwise to select the options.
MENU 6.15 SYSTEM SETTING MENU For password Input, you may use the CH keys (Pic 1) or following function keys (Pic 2).
Recording 7.1 INSTANT RECORDING Press REC key to start continuous recording with setting of “NORMAL RECORD”. REC The recording rate and recording quality are set in the RECORD SETTING MENU. The LCD screen on the front panel of DVR will display as follows: 2003/11/23 REC 21:56:47 50 HDD1 IPS 70% 21:56:52 Display shows operation status, active HDD, record position on active HDD, record frame rate ant current time.
Playing Back 8.1 NORMAL PLAYBACK (1) Playback Press the PLAY key to start playing back the stored image/audio from the last SEGMENT. PLAY NOTE: In Duplex mode (simultaneous record and playback) the playback speed is limited to 25 IPS. For real time display of 50 IPS records stop recording before starting playback. (2) Fast Forward/Reverse Playback During playing back, turn the SHUTTLE ring clockwise to start fast forward playing back. The speed will be shown on the screen at the bottom of the screen.
Search Playback 8.2 SEARCH PLAYBACK (1) Segment List search playback Press SEARCH key to enter the SEARCH MENU dialog. SEARCH SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Turn the JOG dial to select BY SEGMENT LIST and press ENTER key. A segment is a range on the HDD, beginning with record start (manual, alarm, motion or after power loss) and ending with record stop. NOTE: If the recorder starts to overwrite a HDD, also a new segment will be generated.
Search Playback (2) Alarm List search playback Press SEARCH key to enter the SEARCH MENU dialog. SEARCH SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Turn the JOG dial to select BY ALARM LIST and press ENTER key. The submenu will display as follows: ALARM SEARCH 00001 00002 00003 M01 2003/04/24 19:03:29 HDD 1 A03 2003/04/25 12:30:30 HDD1 M03 2003/05/20 12:00:00 HDD2 A01 : Alarm recording by Alarm-in 1. M03: Motion recording by camera 3. T : Timer recording.
Search Playback (3) Date/Time Search Playback Press SEARCH key to enter the SEARCH MENU dialog. SEARCH SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Turn the JOG dial to select BY DATA TIME and press ENTER key. The submenu and instruction will display as follows: DATE/TIME SEARCH YEAR/MM/DD HH:MM:SS HDD 2003 /01 /01 21: 33: 26 1 PRESS SEARCH TO START SEARCH PRESS MENU TO EXIT Turn the JOG dial to select desired date/time and stored hard disk.
DATA EXPORT 9. DATA EXPORT Insert a Compact Flash card into the Compact Flash slot on the front panel of DVR. When inserting the Compact Flash card, make sure that insert direction is correct. NOTE: COPY function is not possible during RECORD. Stop recording to enable COPY function! 9.1 STILL IMAGE COPY PAUSE The still image copy function is possible in all playback view modes. Press the PLAY key to start playing back. Press the PAUSE key to pause playback.
DATA EXPORT 9.2 COPY TO MOVIE FILE NOTE: COPY function is not possible during RECORD. Stop recording to enable COPY function! Press the PLAY key to start playing back. PLAY Press COPY key and then the copy menu and instruction appears.
DATA EXPORT 9.3 EXPORT EVENT LOG LIST This function allows to export the event log list to CompactFlash – Card. The generated text file is in *.txt format. Press „DISPLAY“ key and hold key for about 2 seconds.
MONITOR VIEWS / OPERATION 10. MONITOR VIEWS / OPERATION The EDSR400/EDSR600 digital recorders provide 1 main monitor and 1call monitors.
MONITOR VIEWS / OPERATION 10.2. CALL MONITORS Press CALL to change settings for CALL monitor. The Main monitor shows following dialogue: CALL SETTING CALL MONITOR... SPOT 03 OSD ON HIT 1~4 (1~6) TO SELECT SPOT CAMERA PRESS SEQ FOR SEQUENTIAL CAMERA PREE DISPLAY TO TURN OSD ON/OFF PRESS MENU TO EXIT Please follow the instruction on the display for further operation: SPOT: Hit numeric keys 1~4 for EDSR400, 1~6 for EDSR600 to select spot camera. SEQ: For sequential cameras.
11. REMOTE CONTROL 11.1 RS-485 REMOTE CONTROL The new standard EverFocus EDSR remote protocol allows challenging installations with DVR remote control at different installation sites. EDSR remote control is supported by the optional keyboards KS-KBJ (with 3-axis joystick and 2 additional RS-485 – Ports for telemetry control with independent telemetry protocols) and KS-KBK (no telemetry). Up to 32 units are allowed in the RS -485 bus.
IR Remote Controller 11.2 IR Remote Controller (optional) The remote controller (RC-200, Figure 1) is an accessory to enhance the handy operations of the DVR. You can perform all the settings and operations by the remote controller. The effective distance is up to 10 meters without any obstacle. The keypad functions are same as the front panel key button of the DVR. There are some replacement keys for JOG and SHUTTLE, definitions are: JOG : Same as turning the JOG clockwise.
View From Internet/Intranet 12. View From Internet/Intranet Basic Operations and Login Display: Go to the Internet Explorer, key in the network IP address, for example, http://192.168.10.5 (must be the same IP address as the one assigned to the unit from the Network Setting Menu. You need a FIXED IP Address, please contact your ISP for the IP) The LOGIN dialog will show on the screen. User’must enter the correct user-name and password defined in the Network Setting menu.
View From Internet/Intranet Main Screen The picture is sampling from EDSR900 9 CH DVR 10 11 19 12 13 14 1 2 3 4 5 6 7 8 9 15 16 17 18 Above diagram is the main screen display. The icons on the lower corner of the screen are mainly for control and Configuration, those on the right corner are for status indication. If any icon is grayed, it means that the specific function is not accessible in the current mode. The followings are a brief description for each of the icons. 1. REV.
View From Internet/Intranet 10. The system allows up to 3 ways playback video, by SEGMENT, ALARM LIST and DATE TIME. (Playback by SEGMENT LIST, click Refresh to show list) (Playback by ALARM LIST, click Refresh to show list) (Playback by Date time) Above pictures are sampling from EDSR900 9 CH DVR for reference.
View From Internet/Intranet 11. All available segments are shown in the list. Click to select and highlight. 12. Click to playback selected video segment. 13. Press this icon to show the segment or list. 14. Current connection and playback status is shown along with date and time. 15. Full screen view. 16. Quad screen view. 17. Nine split screen view. (only for 9 CH DVR). 18. Sixteen split screen view (only for 16 CH DVR). 19.
Appendix-A LAN Functional Specification Specifications: Network Interface: LAN controller Chip: LAN Connector: Protocol: Remote Access: Image Compression: 10Mbits/s Ethernet (10Base T) RealTek 8019 RJ-45 HTTP,TCP/IP.ICMP,ARP Standard browser such as internet Explorer / Netscape with JAVA support JPEG Used Ports: Max. user numbers: Frame rate: 80, 1111, 2222, 3333, 4444, 6666 4 max.
Appendix-B Time Lapse Mode Recording Time Table ? When Recording with 160GB HDD (Estimated with typical image-low noise level) Lower Low Basic Standard High Superior : 15 kB : 19 kB : 23 kB : 27 kB : 31 kB : 35 kB LOWER 15 49.4 98.8 148.1 197.5 296.3 592.6 2963 5925.9 9876.5 14814.8 LOW 19 39 78 117 155.9 233.9 467.8 2339.2 4678.4 7797.3 11695.9 system storage(GB): 160 PICTURE QUALITY (KB) BASIC STANDARD HIGH SUPERIOR 23 27 31 35 32.2 27.4 23.9 21.2 64.4 54.9 47.8 42.3 96.6 82.3 71.7 63.5 128.8 109.
Appendix-B ? When Recording with 320GB HDD (Estimated with typical image-low noise level) Lower Low Basic Standard High Superior : 15 kB : 19 kB : 23 kB : 27 kB : 31 kB : 35 kB LOWER 15 98.8 197.5 296.3 395.1 592.6 1185.2 5925.9 11851.9 19753.1 29629.6 LOW 19 78 155.9 233.9 311.9 467.8 935.7 4678.4 9356.7 15594.5 23391.8 system storage(GB): 320 PICTURE QUALITY (KB) BASIC STANDARD HIGH SUPERIOR 23 27 31 35 64.4 54.9 47.8 42.3 128.8 109.7 95.6 84.7 193.2 164.6 143.4 127 257.6 219.5 191.2 169.3 386.5 329.
Appendix C: Serial Interface Specifications Serial Interface Specifications 1. RS-232 pin assignment The DVR may be controlled by a computer or a terminal via the standard D-SUB 9-pin RS-232 connector.
Appendix C: Serial Interface Specifications 3. Remote Control Protocol A computer or a terminal can be used to control the unit by sending the packet as following. 1-1.
Appendix C: Serial Interface Specifications 2-1. The format of message packet is as follows: Length Byte (Prefix: 0x86, 0x87, or 0x88 ..... ) Receiver ID high byte Receiver ID low byte Opcode Byte Data Byte1 Data Byte2 Data Byte3 Checksum Byte 2-2. Length Byte This Length Byte is also a prefix. Bit7 must be 1. EX: 0x87 ==> this packets has 7 bytes length.
Appendix C: Serial Interface Specifications 2-3. Receiver ID 2-3. Receiver ID 1).
Appendix C: Serial Interface Specifications 2-4. Opcode Byte & Data bytes 2-4-1. OPcode OPcode Data1 Function 0x4B Keycode A remote key pressed 0x4D command Matrix command 2-4-2.
Appendix-D Alarm I/O pin assignment The alarm connector, Figure 1, is used to provide one sensor alarm input for each camera input. For easy operation, an alarm extension board, Figure 2, is provided to connect to the alarm connector. Each alarm input requires two wires, one wire connects to the desired alarm input pin, the second wire connects to the ground.The alarm signal assignment is shown at the following.
EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw European Office: Albert-Einstein-Strasse 1 D-46446 Emmerich, Germany www.everfocus.de TEL: 49-2822-9394-0 FAX: 49-2822-939495 USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.
