User manual

NAV Series TCP/IP Standalone Network Access Controller
69
9 Real-time Monitoring
9.1 Real-time Event
Select the system menu bar “System” “Realtime Monitoring” “Realtime Event to
entertherealtimemonitoringpage;seethefigurebelow:
Figure 9-1 Real-time event
As shown in the above figure, the realtime event monitoring page is divided into three
basicregions.
The control panel is positioned in the column on the leftmost side and has door status
indication icons for Door Open and Door Close and alarm indication icons for Protection
Setup,ProtectionWithdrawal,AlarmandAlarmResetaswellasaLogoffbutton.
Theelectronicmapispositioned in themiddleupperpartandthe realtime status iconof
thedevicedisplaysthedifferentstatus ofthedevice,such aswhetherthe doorisopenor
closed,ifthereisanalarmornot,etc.
The realtime event records of the controller are positioned in the middle part. It
automatically receives the event information of the controller and scrolls the event
information to display in real time. In case of accessing the page for the first time, the
eventsofthecontrolleraresequentiallylistedaccordingtothesequenceofbeingreceived.
Whenreceivinganewevent,itautomaticallyliststhelatesteventinthefirstline.
The cardholder information and CCTV realtime monitoring image are positioned on the
right side of the page and are used to display the information of the cardholder who
triggers the event of the controller. When clicking to select the middle realtime event
record,iftheselectedeventcontainsthecardholderinformation,therelatedinformationof
the cardholder, such as photo, name, gender, department, etc., will be displayed in the
cardholder inf ormation column on the rightmost side; if there is no information for the
cardholder,therelatedcontentsinthiscolumnareblank.
Chapter
9