User`s manual

EHN Series Mini Rugged IP Dome
45
Day Profile/ Night Profile: Select Day Profile to configure the following settings for daytime and select
Night Profile to configure the following settings for nighttime. Click the Apply button to save the
settings.
【Exposure Settings】This function can only be set up in the Advanced tab. This setting is used to adapt to
the amount or type of light used by the camera. Click Apply to apply the changes or Cancel to cancel
the changes and return to the previous settings.
 Mode: Select a mode from the drop-down list.
• Auto: Selecting Auto for the camera to automatically adjust the Shutter based on the
measured light level.
• ALC (Shutter Priority): Selecting ALC (Automatic Light Control) allows the camera circuitry to
either take bright spots more into consideration (peak), bringing out detail in bright areas, or
less into consideration (average) bringing out detail in shadows.
• Manual: Select this option to manually set up the Shutter (Manual) and AGC (Manual) values.
 Shutter (Manual): The function is only activated if you select ALC or Manual in the Mode field. If
enabled, this setting lets you set the shutter speed yourself (measured in fractions of a second).
 AGC (Manual): The function is only activated if you select Manual in the Mode field. Set the Auto
Gain Control limit here. The lower the AGC level, the lower the video signal and the noise.
 Slow Shutter: The function is only activated if you select Auto in the Mode field.
 AGC: The function is only activated if you select Auto or ALC in the Mode field. Set the Auto Gain
Control limit here. The lower the AGC level, the lower the video signal and the noise.
 Flickerless: The function is only activated if you select Auto in the Mode field. Choose between
OFF, 50HZ, 60HZ, 50HZ (High Luminance) or 60HZ (High Luminance).
【Backlight Compensation Settings】This function is useful when the background of the subject is very
bright and the subject itself is dark. Click Apply to apply the changes or Cancel to cancel the changes
and return to the previous settings.
 BLC Edit Mode: Click the Enable button, the BLC grids appear on the image. Click on the grids to
enable / disable the BLC function. The selected grids (in green) will be applied with the BLC
function.
【Features】This function can only be set up in the Advanced tab. Click Apply to apply the changes or
Cancel to cancel the changes and return to the previous settings.
 Noise Reduction (NR): This limits the amount of digital “video noise” that is usually found in any
video stream, and helps to reduce file size. Select ON / OFF to enable / disable the Noise
Reduction function. Slide the Level bar to set up the level. The higher the level, the more the
reduction.
 Wide Dynamic Range (WDR): The WDR function provides clearer images when both of the very
bright and dark areas simultaneously appear on the camera view. There are three value options:
OFF, ON and Auto. Note that when WDR is ON, some parts of the image may appear solarized.
This is normal for WDR, and is not a camera malfunction.
 Monitor Type: Users can use this field to optimize video quality of the monitor.