EKB200 USB Controller Keyboard Installation / Operation Instructions Rev. 1.
SAFETY WARNINGS • Do not place the device near to heaters, furnaces, other heat sources or under direct solar irradiation. • Operate the device only in locations providing the tolerable operating temperature range 0°C~50°C. • For cleaning, make sure the device is plugged off and only use a damp cloth without acid detergent. • Install the device only in dry and dustproof surroundings. Protect the device against any liquid’s penetration. • Avoid the penetration of any artefacts, e.g.
CONTENTS 1 Introduction ......................................................................................................................................................2 2 Delivery scope .................................................................................................................................................2 3 Specifications...................................................................................................................................................
3 SPECIFICATIONS Interface: USB1.1 (USB2.0 compatible) PTZ function key: 4 keys, Iris+, Iris-, Focus+, Focus- Re-assignment key: 12 keys Default protocol: USB HID class 3 axis Game controller Mounting method: Desktop, Sunk-In Power/ power consumption: USB bus power 5 VDC/ 80mA (maximum) Certification: CE/FCC class A Operating system for EverFocus JoyMapper Microsoft® Windows XP, 2000, Vista application Length/Color of USB cable: 1.8 meter/ Black Dimension: 200.5 (W) x 200.5 (D) x 108.
INSTALLATION 3.1 USB - Connection Connect the USB-cable to the USB port of the PC or device, which supports EKB-200. The EKB-200 is compatible to USB 1.1 and USB 2.0 interfaces. The EKB-200 will be detected by PC as "USB, 3-Axis, 16 button gamepad". 3.2 Sunk-In Desk Installation For sunk-in mounting is a cut-out in the panel required. The minimum dimensions are shown in drawing below: Back Front The fixation brackets in the package support a mounting in panels with a maximum thickness of 15 mm.
3.3 Key labels The EKB-200 provides exchangable key description labels. This allows the user to customize the key labels to his application and the assigned key functions. Example: 9.5 The label sheets have a size of 104 x 9.5 mm. A key lable template form in *.doc and *.rtf format can be found at the service CD in the EKB-200 package. 3.
In Settings mode, click “calibrate” button to do calibration. 4. In Device Calibration Wizard starting page, click “Next” to continue. 5. To find center point, leave the handle centered, then press a button on the controller. Click “Next” to continue.
6. Move the handle in complete circles, then press a button on the controller. Click “Next” to continue. 7. To verify center point, leave the handle centered, then press a button on the controller. Click “Next” to continue. 8. Move the Z axis all the way up and down, then press a button on the controller. Click “Next” to continue. 9. Calibration is completed. To save your calibration, click “Finish”. 10. Finally, click “Apply” button to apply the settings to EKB200.
3.5 Installation of JoyMap The JoyMap tool allows the assignment of standard windows operations to the EKB-200. Installation steps of JoyMap for EKB200: Double click “Setup.exe” file. The installer will guide you through the steps required to install JoyMap for EKB200 on your computer. Click “Next” to continue. 3. Direct to the folder where you wish to install the program by pressing “Browse”. If you wish to install JoyMap for yourself, select “Just Me”.
5. With the message "Installation Complete" the JoyMapper setup is finished. Click “Close” to exit.
4 OPERATION 4.1 Assigning Windows functions with JoyMap - application NOTE: The EverFocus JoyMapper application will only work correctly with connected EKB200 keyboards. Other joystick devices are not supported. If no EKB200 is connected, the application will show after start: "DEVICE: No EKB200 found". 1. Go to “Start” -> “Program” -> “EverFocus” -> “JoyMap” -> “JoyMap”. 2. Double click the JoyMap icon in the task bar to open JoyMap window. 3.
Start with windows: JoyMapper will automatically starts with windows start. Run minimized: JoyMapper window will be minimized if you check this box. Check input (mSec): Delay time between the commands coming from the Joystick are read into the application. 100ms means 10 times per second the USB port is read by the AP and the read commands are processed. Default value is 100 mSec. It is selectable from 40~1000 mSec. Mouse sensitivity: Select mouse sensitivity level.
None: Set the device as none if you are not using a special key for the device. Mouse: Set mouse definition for the device. For example, for button 1, if you wish to set it as a left click button, select left click and mouse definition will be shown in “key” column: System: Set system function for the device. There are 4 system functions available: power off, suspend, hibernate, log off and reboot.
Profile Switch: this is used to switch between profiles. Application Switch: this is used to switch between applications.
4.2 EKB-200 Operation with PowerCon Management Software The EKB-200 keyboard is supported in PowerCon management software from version 4.3.
Select a key in the list. Right click in the right corner of any field in the "Action" Column to open a context menu with a selection of available PTZ commands. If the command requires a value, such as GoTo Preset [x] or Tour [x], enter the number [x] in the field "Value". "OK" saves the changes and closes Configuration menu, "CANCEL" closes menu without saving the changes.
EverFocus Electronics Corp. Head Office: Europe Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Albert-Einstein-Strasse 1 Hsi-Chih, Taipei, Taiwan D-46446 Emmerich, Germany TEL: +886-2-26982334 TEL: +49-2822-9394-0 FAX: +886-2-26982380 FAX: +49-2822-9394-95 www.everfocus.com.tw www.everfocus.de USA L.A. Office: China Office: 1801 Highland Ave. Unit A Room B-05D-1, KESHI PLAZA , Shangdi Information Industry Base, Duarte, CA 91010, U.S.A.
