Manual
Table Of Contents
- Introduction
- Getting Started
- General Operation
- OSD Root Menu
- Search and Playback
- System
- Remote Access to the Mobile DVR
- Accessing the Mobile DVR on the Network
- Remote Live View
- Menu Bar
- Express
- Camera
- Basic Setting
- Adjust Setting
- Record
- Event
- Alarm
- Video Loss
- Motion
- GPS Event
- G-Sensor Event
- Other
- Disk
- Disk
- SD Card
- Lock/Format
- Display Setting
- Monitor OSD
- M/T SEQ
- Network
- LAN
- Wireless
- Mobile
- DDNS
- FTP
- Alarm Server
- Remote/Mobile
- Xfleet
- Schedule
- Express Setup
- Holiday
- Schedule
- System Setting
- Date/Time
- Daylight Saving
- User Group
- User Management
- I/O Control
- EKB200 Setting
- Miscellaneous
- Information
- System
- Log
- Copy
- Search
- Time Search
- Event Search
- PTZ
- Specifications
- Troubleshooting
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: Timing of Alarm Modes
- Appendix D: Express Setup Recording Value Selection Rules
- Appendix E: IR Remote Control
- Appendix F: RTSP URL Syntax
- Appendix G: Tested Card Brands
- Appendix H: Recording Backup through EF-Reader
- Appendix I: Auto HDD Retry Mechanism
EMV400 FHD Mobile DVR
46
Everfocus and Pelco PTZ cameras.
11. To operate the Tour function:
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Go button.
12. To remove a pre-configured Tour (if supported by the camera):
a. Click the Tour button.
b. Click the desired Tour number.
c. Click the Delete button.
Click C to clear the entered number in the Number Box.
Click at the top-right corner to hide the PTZ Control Panel (see 4.1.1 Express Control of PTZ).
To display the PTZ Control Panel, right-click on the screen.
Click Exit PTZ to close the PTZ Control Panel and exit the PTZ mode.
Note: Before start using the Auto Pan, Pattern and Tour functions, you have to configure the
related settings for the connected PTZ cameras. Please refer to the User’s Manual of your PTZ
cameras.