Volume EverFocus 1 Operation Instruction 1/3" CCD Standard/High Resolution Digital Color Box Camera EQ200E/300E
Operation Instruction © 2008 EverFocus Electronics Corp Please read this manual first for correct installation and operation. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice. All rights reserved.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents 1. Product Overview……………………………………………5 1.1 Features ................................................................. 5 1.2 Accessory Parts List ................................................ 6 1.3 Specifications ......................................................... 7 1.4 Dimensions ............................................................. 8 1.5 Back Panel Overview ............................................... 8 1.6 Camera Setting DIP Switch .....................................
C H A P T E R 2 I N S T A L L A T I O N C H A P T E R 1 P R O D U C T O V E R V I E W Chapter 1 Product Overview The new redesigned EverFocus color box camera produces excellent images with 1/3” SONY Super HAD CCD. The EQ series offers cost-effective solutions suitable for all your surveillance applications. The camera includes an adapter ring and it is compatible with both C-mount and CS-mount lenses. In addition, EQ300E/EQ200E provides 24 hours monitoring Day/Night function.
C H A P T E R C H A P T E R 2 1 I N S T A L L A T I O N P R O D U C T O V E R V I E W 1.2 Accessory Parts List Please be careful when you unpack the box due to the electronics devices inside.
C H A P T E R 1 P R O D U C T O V E R V I E W C H A P T E R 2 I N S T A L L A T I O N 1.3 Specifications Type Pickup Device Video Format Scanning System Picture Elements EQ200E EQ300E 1/3'' SONY Super HAD CCD NTSC or PAL NTSC: 525 TV lines, 60 fields/sec PAL: 625 TV lines, 50 fields/sec. 510 x 492 (NTSC) ; 500 x 582 (PAL) 768 x 494 (NTSC) ; 752 x 582 (PAL) Horizontal Resolution 380 TV Lines 520 TV Lines Sensitivity 0.3 Lux/F=1.2 0.4 Lux/F=1.
C H A P T E R 2 I N S T A L L A T I O N C H A P T E R 1 P R O D U C T O V E R V I E W 1.4 Dimensions 1.
C H A P T E R 1 P R O D U C T O V E R V I E W C H A P T E R 2 I N S T A L L A T I O N 1.6 Camera Setting DIP Switch 1 DD/VD ○ For video drive auto iris lens, please set switch to VD. For Direct Drive iris lens, set switch to DD. Wire the cable of lens to Mini Plug according to the following table: IRIS 3 Pin1 Pin Pin 3 Pin 4 Video Drive +12V GND VD-IRIS GND 1 Direct Drive CntCnt+ Drv+ DrvFor Direct Drive iris lens: Brightness Level can be adjusted from the IRIS level VR on the back panel.
C H A P T E R 2 I N S T A L L A T I O N Chapter 2 Installation This chapter will describe, in general terms, how to install the EQ300E/EQ200E camera. STEPS: 1. Plug the power 2. Mount the lens 3. Connect the video output 4. Adjust the lens 2.1 Plug the Power Plug the power cord to the outlet. Power indicator LED should light if the power source is properly connected. Warning • To prevent electrical shock, turn off the electrical power before making electrical connections.
C H A P T E R 2 I N S T A L L A T I O N 2.4 Adjust the Lens Once the image appears on the monitor, adjust the focus and diaphragm of the lens to obtain the best picture. When a lens does not hold focus at both ends of the zoom range, do back focus adjustment as following: i. Set the focus ring of the lens to infinity position. ii. Take picture of subject at a distance more than 20m away from the camera. iii.
C H A P T E R 2 I N S T A L L A T I O N EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA L.A. Office: 1801 Highland Ave. Unit A Duarte, CA 91010, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com USA N.Y. Office: 415 Oser Avenue Unit S Hauppauge, NY 11788 TEL: 631-436-5070 FAX: 631-436-5027 www.everfocus.