INSTRUCTION MANUAL 1/3” W-Dynamic High Resolution Color Camera EQ600 WDII Version 1.0 About this manual Before installing and using this camera, please read this manual carefully. Be sure to keep it handy for later reference.
Safety Warning 1. Read manual carefully before installing the unit. Please read this manual first for correct installation and operation. 2. Never install the camera on a ceiling that cannot hold its weight The product may fall down to cause damages. 3. Do not install the camera near electric or magnetic fields. Installed the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers because the magnetic fields generate from above devices will distort the video image.
Table of Contents 1. Product Overview……….………………..……………..………………………….…….…2 1.1 Main Features.…..…………..………………………………………………..…………2 1.2 Content List………………………………………………………………………………2 1.3 Specifications……………..……….……………………………………………………..3 2. Back Panel Connections………………………….………………………….…………….4 3. Operation………………………………………………………..………………..……..…5~6 3.1 Setup Buttons…...………………………………………………………………..……...5 3.2 Display/Close the user setup menu screen…..………………………………………6 4. Main Menu Flow……..…………..………..…………………………………………………7 5.
Product Overview 1. Product Overview By utilizing Digital Pixel SystemTM (DPS) sensor technology, the new EQ600WDII dramatically improves the performance of surveillance camera in extreme lighting conditions. Where traditional CCD cameras have difficulty processing images in strong backlighting, the EQ600WDII processes each pixel independently, correcting for the variations and providing the best possible image under the lighting conditions. 1.
Specifications 1.3 Specifications Pickup Device 1/3” Color DPS sensor Picture Element 720(H) × 540(V) Horizontal Resolution >480 TV lines Sensitivity 1.0 Lux/ F=1.2 (50IRE color) Low Speed shutter Up to 32x(2,4,8,16,32) S/N Ratio >48dB Auto exposure: YES Auto White Balance Yes, 2500K ~9500K Back light compensation YES Auto IRIS YES Video Outputs 1.
Back Panel Connections 2. Back panel connections (8) (7) (6) (5) (1) (4) (3) (2) (9) (1)S-Video / RS-232 port: Connect Mini Din Male Connector to S-Video / RS-232 port for better video output quality or communication.
Operation 3.Camera Setup Operations This camera utilizes an On Screen Display (OSD) user setup menu. 3.1 Setup Buttons: To set items on the user setup menu, use the following buttons on the back panel. ④Left Button ①Up Button ⑤Set Button ③Right Button ②Down Button ① Up Button: This button is used to move the cursor upwards. Use this button to select an item or adjust the parameters. ② Down Button: This button is used to move the cursor downwards.
Operation 3.2 Display/Close the user setup menu screen SET Button Highlighted EWD600 MAIN MENU > PRESETMODE INDOOR… CAMERA ID OFF ADVANCED SETUP … SAVE/RESTORE… EXIT MENU The Cursor Buttons & the SET Button I. Press the SET button for 2 second The menu screen will appear on the monitor as the block shown above. II. Using the cursor button Use the cursor button or to move the cursor up or down. Use the cursor button or to adjust the mode or parameter of settings.
MENU Flow 4. MAIN MENU FLOW EWD600 MAIN MENU EWD600 MAIN MENU > PRESETMODE INDOOR… CAMERA ID OFF ADVANCED SETUP… SAVE/RESTORE… EXIT MENU >PRESET MODE… EWD600 MAIN MENU >CAMERA ID… < OFF> ADVANCED SETUP > AUTO IRIS… WHITE BALANCE… LINELOCK… VIEWING… PREVIOUS PAGE SAVE/RESTORE > RESTORE USER SETTINGS.. SAVE USER SETTINGS.. RESTORE FACTORY SETTINGS.. RESET CAMERA.. MENU REV. PREVIOUS PAGE… 7 0.
MENU 5. PRESET MODE I. EWD600 MAIN MENU >PRESET MODE II. III. Select the suitable settings, such as INDOOR, OUTDOOR, FLUOR. or BACKLIGHT based on the installation environment. Press the SET button to enter USER SETUP menu for adjusting the parameters. The parameters will be stored as USER automatically after changed. USER SETUP >CAMERA VIEW 5.
MENU 5.2 USER SETUP I. CAMERA VIEW: The lighting conditions of the area where the camera views. SHADOW or HIGHLIGHT II. SLOW SHUTTER: . When the setting is OFF, it is only operate with AGC in low light condition and keep the color image.. When select “ON” then camera will into the slow shutter mode in low light condition. User can setting slow shutter limit from 2x ~ 32x. And select COLOR or B/W image when slow shutter is operation by setting SS PROTERTY.
V. Select “ BACKLIGHT” in the strong backlight environment, for example, the lighting condition of building lobby. Set a suitable location or size of the frame by using the same setting procedures as “ NORMAL”. PREVIOUS PAGE: Return to the previous page by selecting PREVIOUS PAGE.
MENU 6. CAMERA ID EWD600 MAIN MENU >CAMERA ID < OFF> ID SETUP > CAMERA ID _________ ID POSITION UP-LEFT ID COLOR WHITE ID BACKGROUND NONE PREVIOUS PAGE 6.1 CAMERA ID: The camera ID can be turned “ON” to be displayed on the screen, or “OFF”. The default camera ID is “OFF”. When “ON” is selected, user can set the Camera ID up to 12 characters. Please refer to Appendix A for detail character patterns.
MENU 6.2 ID POSITION: There are four positions can be chosen to show the CAMERA ID on the screen. Choose an ID position that will not cover the import/critical part of images. ID SETUP ID POSITION CAMERA ID ___________ > ID POSITION UP-LEFT ID COLOR WHITE ID BACKGROUND NONE PREVIOUS PAGE 6.
SE MENU 7. ADVANCED SETUP 7.1 AUTO IRIS ADVANCED SETUP > AUTO IRIS… WHITE BALANCE… LINELOCK… VIEWING… PREVIOUS PAGE AUTO IRIS > GAIN +++++++++++ 0 130 255 AI THRESHOLD ++++++++++++ -37 –10 43 AI CORRECTION +++++++++++ 0 100 255 PREVIOUS PAGE… I.GAIN: Use or to adjust the DC IRIS GAIN from 0 ~255. The higher the DC GAIN, the more sensitive the camera will be. II.AI THRESHOLD: Use or to adjust the THRESHOLD of AUTO IRIS level from -37 ~43.
7.2 WHITE BALANCE ATW SETUP >COLOR TEMP ADVANCED SETUP AUTO IRIS > WHITE BALANCE… LINELOCK… VIEWING… PREVIOUS PAGE WHITE BALANCE SETUP > MODE +++++++++ -2000 800 2000 +++++++++ 1 10 100 PREVIOUS PAGE… SPEED WHITE BALANCE SETUP PREVIOUS PAGE… >MODE PREVIOUS PAGE… MANUAL WHITE BALANCE >KELVIN +++++++++++ 2000 5500 11000 PREVIOUS PAGE… I.ATW: Auto Tracking White Balance.
MENU 7.3LINELOCK ADVANCED SETUP AUTO IRIS… WHITE BALANCE… > LINELOCK… VIEWING… PREVIOUS PAGE LINELOCK SETTING >LINELOCK PREVIOUS PAGE… V PHASE >V PHASE ++++++++ 0 519 624 PREVIOUS PAGE… I.AUTO: Set as AUTO LINELOCK mode,it will auto sense the line signal to decision whether runnig LINELOCK function or not. And press SET user can into the adjustment manual of V PHASE use button or to select the V PHASE from 0~624. The larger the V Phase parameter, the more delay time the LINELOCK.
MENU VIEWING SETUP BRIGHTNESS 100IRE CHROMA ++++++++++ -20 -1 20 GAMMA MODE AUTO > SHARPNESS… MIRROR OFF COLORBAR OFF PREVIOURS PAGE… SHARPNESS > GAIN +++++++++++ -8 0 8 HORIZONTAL +++++++++++ -8 0 8 HIGH LIGHT APTURE ON PREVIOUS PAGE… IV. SHARPNESS: Adjust the SHARPNESS level of full screen by setting the “GAIN” level from -8 ~8. Select “ HORIZONTAL” for adjusting H. SHARPNESS only. In the high light environment, select “ HIGH LIGHT APTURE”, then set “ON” or “OFF”.
MENU 8. SAVE/RESTORE EWD600 MAIN MENU SAVE/RESTORE > RESTORE USER SETTINGS.. SAVE USER SETTINGS.. RESTORE FACTORY SETTINGS.. RESET CAMERA.. PRESETMODE INDOOR… CAMERA ID OFF ADVANCED SETUP… > SAVE/RESTORE… EXIT MENU MENU REV. PREVIOUS PAGE… 0.1 I. RESTOER USER SETTINGS Restore the previous user settings from memory. Press SET button to restore user setting. II. SAVE USER SETTINGS Save USER SETTINGS into the camera memory. Press SET button to save user setting. III.
Appendix-A CAMERA ID Character patterns 18
Appendix-B FACTORY SETTINGS CHART PRESET MODE CAMERA VIEW SLOW SHUTTER SHADOW ON BIAS : 6 INDOOR WDR MODE AUTO LIMIT :24 METER MODE NORMAL FULLSCREEN OFF CAMERA ID ADVANCED SETUP GAIN 200 AUTO IRIS THRESHOLD WHITE BALANCE LINELOCK 0 COLOR TEMP 0 SPEED 10 V.
EverFocus Electronics Corp. Head Office 12F, No.79, Sec.1, Shin-Tai Wu Road, Hsi-Chi, Taipei Hsien, Taiwan Tel:886-2-26982334 Fax:886-2-26982380 e-mail: marketing@everfocus.com.tw Website: http://www.everfocus.com.tw USA Office 2445 Huntington Drive, San Marino, CA 91108, U.S.A. Tel: (626)844-8888 Fax:(626)844-8838 e-mail: info@everfocus.com Website: http://www.everfocus.
