User`s manual

EQ610s
10
MODE
There are two modes to select from: AUTO IRIS and SHUT+AUTO IRIS. To
change the mode, highlight the MODE field and press the LEFT and RIGHT
buttons to toggle between the two modes.
 In AUTO IRIS mode, SHUT (shutter speed) is activated and adjustable
while SENSE UP and SHUT MAX are deactivated.
 In SHUT+AUTO IRIS mode, SHUT MAX and SENSE UP are activated and
adjustable. The SHUT MAX value that you select will be the maximum
shutter speed that will be allowed in automatic mode.
BRIGHTNESS
Scroll to the BRIGHTNESS field and use the LEFT and RIGHT buttons to adjust
the screen brightness (000 to 255).
SHUT (shutter speed) / SHUT MAX (maximum allowed shutter speed for
auto)
Use the LEFT and RIGHT buttons to adjust the shutter speed (or to select the
maximum shutter speed – SHUT MAX – for when the camera is in
SHUT+AUTO IRIS mode). The shutter speed and maximum shutter speed can
be set to be anything from a 50
th
of a second up to a 100,000
th
of a second.
LOW LUX BRIGHT. (Low Lux Brightness)
Use the LEFT and RIGHT buttons to adjust the Low Lux Brightness value. The
options are x0.25, x0.5, x0.75, x1.0.
AGC GAIN (Automatic Gain Control)
The bigger the number, the brighter the image. Note that the noise will also
increase as the AGC GAIN is increased. The selectable AGC GAIN values are
000 to 200.
SENSE UP
SENSE UP is used to maintain a vivid screen image by automatically
detecting changes in light levels when the light levels are generally low. Use
the LEFT and RIGHT buttons to switch this function on/off and adjust its
settings. The options are OFF, x2, x4, x8, x16, x32, x64, x128, x256, x512, and
OFF.