User`s manual

EQ610s
14
6.5 2DNR & 3DNR (Digital Noise Reduction)
• Camera performance improves when digital “video noise” levels are
reduced. When recording digitally, the image file size can also be
lessened with noise reduction. The higher the 2DNR and 3DNR settings
(options are from Low to High), the more noise is filtered out.
6.6 DAY/NIGHT
Use this menu item to select COLOR, B/W, EXTERNAL, D/N IN, or AUTO
mode.
• Use the LEFT and RIGHT buttons to select the mode. Press ENTER to
access the selected mode’s setting submenu, where applicable.
• COLOR mode is ideal for DAYTIME. In this mode, the camera is forced to
deliver a Color feed during daytime and nighttime.
• B&W mode is ideal for NIGHTTIME. In this mode, the camera is forced to
deliver a B&W feed during daytime and nighttime.
• AUTO mode switches to a B&W feed in the nighttime and then switches
back to a Color feed in the daytime. The switch-over moments for this
mode are triggered when the correct AGC level is reached.
• EXTERNAL mode works the same as Auto mode. The difference is that
the switch-over moments are based on light levels sensed by the
camera’s light sensor.
The modes for the DAY/NIGHT function
are: EXTERNAL, COLOR, B&W, D/N IN, and
AUTO.
Submenu of the 2DNR & 3DNR mode.
** 2DNR & 3DNR **
2DNR
MIDLOW
3DNR
MIDLOW
RETURN
< ┘
** MAIN MENU **
LENS
AUTO < ┘
EXPOSURE
SET < ┘
WDR
OFF
WHITE BALANCE
ATW < ┘
2DNR & 3DNR
SET < ┘
DAY/NIGHT
AUTO < ┘
IMAGE
SET < ┘
EFFECT
SET < ┘
SYSTEM
SET < ┘
EXIT < ┘
** MAIN MENU **
LENS
AUTO < ┘
EXPOSURE
SET < ┘
WDR
OFF
WHITE BALANCE
ATW < ┘
2DNR & 3DNR
SET < ┘
DAY/NIGHT
AUTO < ┘
IMAGE
SET < ┘
EFFECT
SET < ┘
SYSTEM
SET < ┘
EXIT < ┘