User`s manual

EQ610s

- AREA SEL

Up to 15 areas can be masked. Use your LEFT and RIGHT buttons to

select the number of the mask you want to switch on/off or edit. By

default, all 15 mask areas will be activated and displayed on the screen,

in five different-colored columns. To switch them off, or to tweak their

shapes and colors, follow the instructions below.

- MODE

Choose ON to activate the mask area, and to display and edit it on the

screen, OFF to hide the protected area on the screen.

- POSITION

To edit the area selected in the Area Sel line, press the ENTER button. A

blue cursor will appear at the bottom right corner of the selected area

block. Adjust the block’s size and shape by using your direction buttons

to drag the corners of the blocks. Press ENTER to switch between the

four corners. Pressing ENTER a fifth time will close the submenu. Press

ENTER again to open the same area block’s submenu again, or select

another area block to edit.

- COLOR

Use the LEFT and RIGHT buttons to adjust the color of the selected

Privacy Mask. The options are BLACK, RED, GREEN, BLUE, YELLOW, CYAN,

MAGENTA and WHITE.

- TRANSP

Use the LEFT and RIGHT buttons to adjust the Transparency of the

Privacy Mask. The options are 0.00, 0.50, 0.75 and 1.00. Note that the

MOSAIC function will be disabled when the Transparency is set to

1.00.

- MOSAIC

Switch this function on if you want to give the block a mosaic texture.

Note that the MOSAIC function will be disabled when the

Transparency setting is 1.00.

DIS (Digital Image Stabilizer)

Options are OFF and ON. When set to ON, the DIS function will help to

prevent vibration, and the E-Zoom function will be disabled.