EQ610x Indoor Box Camera 600TVL, High Resolution, D-WDR User’s Manual * Lens not included.
CAUTIONS 1. Do not install the camera near electric or magnetic fields. 2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein. 3. Try to avoid facing the camera toward the sun. 4. Keep the power cable away from water and other liquids and never touch the power cord with wet hands. 5. Never install the camera in areas exposed to oil, gas or solvents. 6. Do not operate the camera beyond the specified temperature or humidity.
EQ610x 1. INTRODUCTION The EverFocus EQ610x box camera features an incredible 600TVL resolution in full color with a low-light sensitivity of 0.15 lux. Delivered by a high-sensitivity sensor, the camera also features the added benefits of advanced DSP technology to enhance image quality.
EQ610x 1.3 SPECIFICATIONS Pickup Device Video Format 1/3" High Sensitivity Color CCD NTSC, PAL NTSC: 811 x 507 Picture Elements (H x V) PAL: 795 x 595 Horizontal Resolution 600TVL Sensitivity 0.15Lux / F1.2 S/N Ratio Over 48dB (AGC off) Video Output 1.0Vp-p Composite, 75Ω ; BNC Gamma Correction 0.45 Lens Type C/CS Mount (Lens sold separately) Back Light HLC / BLC / OFF C i Auto Electronic Shutter 1/60(50) ~ 1/100,000 sec.
EQ610x 2. CAMERA OVERVIEW 2.1 NAMES AND FUNCTIONS OF PARTS 2.1.1 FRONT PANEL Light Sensor Microphone (Reserved for Audio-supporting models) 2.1.2 BRACKET POSITIONS The bracket in the package can be fitted to the screw holes on the top or bottom of the camera for either suspending the camera or supporting it.
EQ610x 2.1.3 Back Panel Back Panel: Side Panel: 8 1) Left-scroll button 2) Up-scroll button 3) Set button (push to activate OSD) 4) Right-scroll button 5) Down-scroll button 6) Video Output Connector BNC connector that connects to a 75 Ohm type coaxial cable to feed the video output of the camera to a color monitor or other video devices. 7) Power Input Terminal Connects to the appropriate power source.
EQ610x 3 INSTALLATION 1. Unscrew the protection cap from the mouth of the lens mounting. 2. If a C-mount lens is to be used, please screw the C-mount adaptor ring (the 5mm-thick ring in the accessory pack) on to the mouth of the lens mounting. 3. Mount the lens by turning it clockwise on the lens mounting of the camera. 4. If you use an Auto Iris lens, connect the lens’s cable to the Auto Iris lens connector on the side of the camera. 5.
EQ610x 4. CONNECTIONS EXT. SENSOR Connect the cable from the video output jack of the camera to the monitor’s input jack. 5. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 5.1 SETUP BUTTONS To set items on the user setup menu, use the following buttons on the back panel.
EQ610x ① ENTER Press this button (by pressing straight down on the stick) to display the OSD’s main menu on the monitor that you have connected directly or indirectly to the camera’s video connector. Also press this button to confirm changes and to open the submenus when they’re available and selected. (Menu items with a “<┘” symbol at the end contain submenus. For adjusting submenu items, select the desired menu item with the and buttons and press the ENTER button to open the desired submenu.
EQ610x 5.2 OSD Operation ** SETUP ** LENS EXPOSURE WHITE BAL. IMAGE ADJ. BACKLIGHT DAY & NIGHT SPECIAL LANGUAGE RESET EXIT DC <┘ ATW1 <┘ OFF<┘ AUTO<┘ <┘ ENGLISH <┘ Note: The OSD display shown in the image above is for reference only. The actual version will look different, but will have the same wording and format. 1. Open the OSD menu Press the ENTER button to open the OSD’s main menu on your screen. 2.
EQ610x 6. CONFIGURATION WITH THE OSD 6.1 LENS The camera’s LENS setting is set to DC and cannot be changed. This menu item is for reference only. 6.2 EXPOSURE ** SETUP ** LENS EXPOSURE WHITE BAL. IMAGE ADJ.
EQ610x DWDR You can turn the DWDR function On and press the Enter button to open the configuration submenu to set the DWDR level. In the RETURN field, scroll to END and press Enter to exit from the configuration menus, or scroll to RET and press Enter to return to the EXPOSURE submenu. RETURN Select RET and press Enter to return to the main menu. Select END and press Enter to exit from the configuration menus. 6.
EQ610x FONT COLOR Use the sliding bar to select the color of the OSD’s font, as well as the color of the ID and Title display’s font. CONTRAST Use the sliding bar to select the contrast level. SHARPNESS Use the sliding bar to select the sharpness of the image. DISPLAY USER: If you select this setting, you can press Enter to set your own Gamma, Ped Level, and Color Gain values for the camera. CRT: If you select this setting, you can press Enter to select the Ped Level and Color Gain values.
EQ610x BLC (Back Light Compensation) Even when there is a bright backlight behind an object, clear images of the object and its background can still be captured by selecting BLC mode. AREA SEL.: Select which of the two given areas you want to configure. AREA STATE: For Area 2, this can be used to activate the area and make the area indicator visible. GAIN: Set the gain of the selected area here. HEIGHT: Increase or decrease the height of the selected area.
EQ610x N->D LEVEL: Select the light level at which the camera will switch from Night mode to Day mode. N->D DELAY: Set the number of seconds that the camera will wait when the N/D change level is reached. In other words, this will be the length of time that the selected light level will have to be sustained before the camera will react. B&W BURST: Switch burst mode on or off here. 6.7 SPECIAL Scroll down to the SPECIAL menu item and press Enter to enter the submenu.
EQ610x LEFT/RIGHT: Move the block horizontally. TOP/BOTTOM: Move the block vertically. DEGREE: Set the sensitivity of the motion detection function for the selected area. A low value means high sensitivity. VIEW: Switch the block display On or Off. If switched On, the blocks inside the activated motion detection area squares will appear as transparent mosaic patterns when they detect motion. PRIVACY Here you can select ON to switch Privacy Masking on.
EQ610x 6.8 LANGUAGE Scroll sideways to choose among English, Mandarin Chinese, Spanish and Russian as the language of the OSD wording. ** SETUP ** LENS EXPOSURE WHITE BAL. IMAGE ADJ. BACKLIGHT DAY & NIGHT SPECIAL LANGUAGE RESET EXIT 6.9 DC <┘ ATW1 <┘ OFF<┘ AUTO<┘ <┘ ENGLISH <┘ RESET Scroll to this menu item and press Enter to open the RESET submenu. If you stay on the FACTORY line and press Enter, the camera’s settings will return to the factory default and all other settings will be lost.
EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 2380 www.everfocus.com.tw marketing@everfocus.com.tw EverFocus Europe - Germany: Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49 2822 93940 FAX: +49 2822 939495 www.everfocus.de info@everfocus.
