Specifications

ManualsBrandsEverFocus ManualsSecurity CamerasEQH5000

HD CCTV

Digital Video Camera

OPERATION MANUAL

EQH5000

Before attempting to connect or operate, please read and follow these instructions.

Summary of content (27 pages)

PAGE 1
HD CCTV Digital Video Camera O PE R AT ION MANUAL EQH5000 Before attempting to connect or operate, please read and follow these instructions.
PAGE 2
CONTENTS 1. CAUTIONS 2. FEATURES 3. EQUIPMENT AND ACCESSORIES 4. CAMERA COMPONENT DESCRIPTION 5. INSTALLATION 6. DIMENSIONS 7. SPECIFICATIONS 8. DIGITAL INPUT/OUTPUT CIRCUIT (Future use) 9.
PAGE 3
1. CAUTIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
PAGE 4
1. CAUTIONS Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
PAGE 5
2.
PAGE 6
3.
PAGE 7
4.
PAGE 8
4. CAMERA COMPONENT DESCRIPTIONS • BACK ① ② ⑤ ⑦ ④ ③ ⑥ ⑧ ⑪ ⑩ ⑨ ①. MENU SET BUTTON MENU NAVIGATION BUTTONS ②. UP BUTTON ③. DOWN BUTTON ④. LEFT BUTTON ⑤. RIGHT BUTTON ⑥. POWER LED ⑦. SDI OUT BNC ⑧. VIDEO OUT BNC ⑨. MIC IN JACK(Future Feature) ⑩. AUDIO OUT JACK(Future Feature) ⑪.
PAGE 9
5. INSTALLATION • LENS CONNECTION Mega Pixel Lenses are sold separately. Lenses such as a DC auto iris lens, CS-Mount lens and C-Mount lens can be used ( adapter included for C-Mount Lens). NOTE • Please keep the lens clean. • Any foreign objects and Finger marks on the lens can cause inferior image quality in low light level conditions.
PAGE 10
5.
PAGE 11
5.
PAGE 12
6. DIMENSIONS Unit: mm(inch) 30(1.18) MOUNTING HOLE (1/4"-20 UNC, Depth 5) 145(5.71) / (C-Mount) 72.58(2.86) 66(2.60) 138.55(5.
PAGE 13
7. SPECIFICATION Image Device 1 /3 ” S O N Y Mega-P i xel C ol or P rogressi ve C MOS Effective Pixels 1329 (H) x 1049 (V) 30fps Unit cell size Video output mode 3.63um (H) x 3.63um (V) HDCCTV : 720p 30, 720p 60, 720p 25, 720p 50 TV Out : NTSC / PAL selectable H.Resolution More than 800 TV Li nes Minimum illumination 1.0 Lux S/N Ratio Max 50dB Shutter speed A uto / Manual sel ectabl e Min. Exposure Time Flickerless 110.
PAGE 14
8. DIGITAL INPUT/OUTPUT • Digital Input Port (Future Feature, Use for CDS Mode Only) CAMERA M i c r oCon t ro l l e r A / D P o rt 1 0 b i t re so l u t i o n , V t o p = 3 . 3 V, V b o t = 0 V Day and Night CDS MODE EXTERNAL DEVICE DI Sensor Input (0~3.3V) R:1.5K G P I N P O RT (3 . 3 V ) Digital Input Port External CDS is only active when day and night mode is set to EXT Mode in the OSD.
PAGE 15
9.
PAGE 16
8 .
PAGE 17
9. OSD MANUAL - WHITE BALANCE Menu WHITE BALANCE MODE ATW / PUSH / MANUAL MANUAL R GAIN 0 ~ 255 B GAIN 0 ~ 255 - DAY / NIGHT Menu DAY / NIGHT MODE COLOR / AUTO / EXT / BW AUTO / EXT DAY LEVEL 0 ~ 127 NIGHT LEVEL 0 ~ 127 - IMAGE Menu IMAGE SHARPNESS 0 ~ 15 IMAGE FLIP OFF, H FLIP, V FLIP, H/V FLIP DNR OFF, LOW, MID, HIGH GAMMA OFF, 1.0, 1.8, 2.2, 2.
PAGE 18
9.
PAGE 19
9. OSD MANUAL • ICONS - : Value adjustment(use LEFT/RIGHT button). - : Select Sub Menu(use SET button). - : Execution command(use SET button). - : Return to previous menu. - : Menu OFF. - : Information. The [SETUP] menu will show up when you push the SET button. • Main Menu [ SETUP ] VIDEO OUT LENS EXPOSURE WHITE BALANCE DAY / NIGHT IMAGE SPECIAL 720p 60Hz DC IRIS AUTO AUTO EXIT SAVE & EXIT - VIDEO OUT : Select SDI Out format and TV Out format.
PAGE 20
9. OSD MANUAL • Video Out [ VIDEO OUT ] SDI TV OUT FORMAT FORMAT 720p 60Hz NTSC - SDI Format Select SDI output Formats – 720p 30Hz, 720p 60Hz, 720p 25Hz and 720p 50Hz. - TV Out Format Select NTSC / PAL. Note : NTSC or PAL Video Format can be selected by pressing the RIGHT Button even when the OSD Menu is turned off - ESC Back to the previous.
PAGE 21
9. OSD MANUAL • EXPOSURE [ EXPOSURE ] - BRIGHTNESS Same as the BRIGHTNESS value in LENS Menu. Using Left / Right button, adjust Brightness value. - SHUTTER Using Set button, go to the SHUTTER sub menu. - AGC MAX Using Left / Right button, adjust AGC Max value. - BLC Using Left / Right button, select on/off of BackLight Compensation Control.
PAGE 22
9. OSD MANUAL • WHITE BALANCE [ WHITE BALANCE ] MANUAL 100 100 MODE R GAIN B GAIN ESC EXIT SAVE & EXIT - MODE Using Left / Right button, select White balance modes – ATW, PUSH and MANUAL. ATW Auto Trace White Balance mode PUSH White Balance Push Lock mode (Auto White Balance Control & Lock) MANUAL Manual White Balance mode - R GAIN This menu appears on screen when MANUAL is selected. Using Left / Right button, adjust Red Gain. -B GAIN This menu appears on screen when MANUAL is selected.
PAGE 23
9. OSD MANUAL • Day / Night [ DAY / NIGHT ] AUTO 50 100 MODE DAY LEVEL NIGHT LEVEL ESC EXIT SAVE & EXIT - MODE Using Left / Right button, select TDN(True Day & Night) modes – AUTO, EXT, COLOR, and BW. AUTO Controlled by AGC level in the processor. (AGC Type) EXT Controlled by signal from CDS sensor. (CDS Type) COLOR Fixed Day State. Color Image. BW Fixed Night State. BW Image. - DAY/Night Levels This menu can be displayed by selecting AUTO or EXT in the MODE Menu.
PAGE 24
9. OSD MANUAL • IMAGE [ IMAGE ] 0 OFF OFF 1.0 SHARPNESS IMAGE FILP DNR GAMMA ESC EXIT SAVE & EXIT - SHARPNESS: Using Left / Right button, adjust sharpness value. - IMAGE FLIP: Using Left / Right button, select Flip modes – OFF, H FLIP, V FLIP and H/V FLIP. - DNR: Using Left / Right button, select Digital Noise Reduction Modes - OFF, LOW, MID, HIGH. - GAMMA: Using Left / Right button, adjust gamma control setting.
PAGE 25
9. OSD MANUAL - USER SET Using Set button, display [USER SET] sub menu. - COMM/GPIO SET Using Set button, display [COMM/GPIO SET] sub menu. - FOCUS MODE In focus mode, the iris becomes fully open, electronic shutter controls the light level, and the TV out screen zooms into the center in order to make focusing easier. When in Focus Mode, the OSD Menu is not displayed. The OSD Menu can be toggled on and off using the Left / Right button.
PAGE 26
9. OSD MANUAL • COMM/GPIO SET (Sub Menu) [ COM / GPIO SET ] RS485 Address (Future Feature) • GP IN Status GP OUT Control LOW LOW ESC EXIT SAVE & EXIT - RS485 Address Future Feature. - GP IN Status ( CDS Mode Only Digital input Future Feature) If the OSD is set to the EXT mode in the [DAY/NIGHT] menu, this port is used to connect to a photo-sensor. - GP OUT Control (Future Feature). For control of an external device by the camera.
PAGE 27
EverFocus Electronics Corp. Corporate Headquarters: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw marketing@everfocus.com.tw China Office: Room 609, Technology Trade Building, Shangdi Information Industry Base, Haidian District, Beijing, China 100085 TEL: +86-10-62973336~39 FAX: +86-10-62971423 www.everfocus.com.cn marketing@everfocus.com.cn U.S.