User`s manual

ETN2160/2260/2560
42
7.2.3.2 Camera control
You can set up the Home position or configure the Auto Pan range on this page. After configureing
the settings, you can operate the configured Home position and Auto Pan using the the PT Control
Panel on the Live View window (see 5.7 PTZ Control Panel).
 Set the home position:
Set default value as home position: Select to restore to the default Home position value. Click
the Apply button to apply the setting.
Set the current position as home position: Select to manually set up the Home position. Use
the PT Control panel to select a location and then click the Apply button to apply the setting.
 Set the auto pan range:
Set default value as auto pan range: Select to restore to the default Auto Pan range. Click the
Apply button to apply the setting.
Set the auto pan range manually: Select to manually set up the Auto Pan range. Adjust the
slider to set up the left and right position. Click the Apply button to apply the setting.
7.2.3.3 Patrol List Setting
You can combine the preconfigured preset points into one long sequence and then use the PT
Control Panel on the Live View window to start the Patrol function.
To set up the Patrol setting:
1. Set up the preset points on the Live View window first (see 5.5 Setting up the Preset Points).
The configured preset points will be listed in the Preset points list (see image above).
2. Drag and drop the desired preset points to the Patrol list. You can adjust the sequencing order
by dragging and dropping the preset points in the Patrol list.
3. Set up the dwell time for each preset point in the box under the preset point (the time that the
camera will pause at each position).
4. Click the Apply button.