User`s manual

ETN2160/2260/2560
54
【Record】: Select this if you want to view the event-triggered recording files (about 7-second video).
Source: Select a video source for recording. It’s recommended to use stream 3 for saving bandwidth.
There are three options, Stream 1, Stream 2 and Stream 3. You can configure the Stream 1 and Stream
2 settings in the Streaming setup (see 7.2.2 Streaming). The Stream 3 is fixed by the system, which is
set up with H.264 and 640x480 resolution, and cannot be configured.
Snapshot prefix file name: Enter a name for the snapshot files. The maximum length is 20 digits.
Add date and time suffix to file name: Check the box if you want to add the date and time
information to the file name. Please check Add date and time suffix to file name box if you
don’t want to overwrite the recording files.
Enable cyclic recording: Check the box for overwriting recording file when the storage capacity is
full.
【Message】: Select this if you want to view the event-triggered messages.