EZ -PL AT EC A M - 0 0 2 High Contrast License Plate Capture Camera IN STA L LAT ION & OP E R AT I O N M A N U A L Before attempting to connect or operate, please read and follow these instructions.
Cont e nts 1 . C AU T I O N S 2 . F E ATU R ES 3 . I T E M S P R O V I D E D I N T H E B OX 4 . CO M P O N E N T A N D CO N T R O L NAMES AND FUNC TIONS 5 . I N STA LL AT ION 6 . O SD MEN U FUN C T IONS 7 . I N STA LL AT ION GUID E LINE S 8 . S P E C I F I C AT I O N S 9 .
1 . C a utions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; 1. Thi s dev i ce may no t cause ha r m fu l i n te r fe re n ce. 2. This device must accept any inte r ference re ceived, including inter ference that may cause undesired operation. Note This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to par t 15 of the FCC Rules.
1 . C a utions Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
2 . F e a t u res • 1/3" Sony Super-HAD CCDⅡ • OSD Menu system customizes performance to match application • High Resolution 600TV Lines • Special filter and IR LEDs provide maximum readability despite headlight glare • Plate capture up to 35mph (56Km/H) • 9.0 ~ 22.0mm Varifocal lens captures license plate from 8ft ~ 33ft (2.5M ~ 10M) • IP66 rated weather resistant • Cable concealed through bracket • DC12V / AC24V Dual power with auto-polarity 3 .
4. C o m po n en t an d Control Na me s a nd Func tions ① ④ ① ② ③ ④ ⑤ ⑥ ⑦ ② ⑦ ① ⑤ ⑥ ⑧ S u n s h i e l d Lo c k B o l t S u ns hi el d M ounting Bracket I R LE D : 20ea Camera Body B o d y Lo c k R i n g E x terna l Zo o m and Fo cus adj u s t m e n t s ⑦ TEST VIDEO OUTPUT ⑧ Cover To Access M enu Co ntrol s & Te s t Vi d e o O u t pu t Pressing the “SETUP” button prompts the main setup menu.
5 . I ns t allation • ADJUSTING CAMERA POSITION 360˚ 90˚ 360˚ Loosen socket head allen screws to change angle and/or rotate body about base. Loosen this lock ring to rotate camera body. Af ter adjusting zoom and focus, to prevent water infiltration, firmly tighten the zoom and focus levers.
5 . I ns t allation • CONNECTIONS DUAL(DC12V/AC24V) Power Supply 24VAC 300 mA min ; 500 mA Recommended 12VDC 600 mA min ; 1A Recommended DC12V/AC24V BNC FEMALE VIDEO IN DVR OR OTHER CCTV EQUIPMENT WHITE: TRIGGER SIGNAL BLACK: TRIGGER GROUND OSD CONTROL VIDEO TEST POINT CONNECTION HANDHELD VIDEO IN TEST CABLE Note: Face of connector with color mark should face “up” when inserting test cable.
6 . O S D Functions OSD Menu Structure • OS D Acces s To access OSD menu unscrew cover plate on rear of camera, press “in” on joystick to access OSD Menu. • MO D E SETUP ▶ MODE - INSTALLATION Installation Mode provides a bright video screen to adjust angle and focus. - LICENSE-PLATE License-plate Mode provides high contrast and clear license plate image for license plate capture. SHUTTER FREEZE-TIME NEG. IMAGE EXIT SETUP MODE • SH U T TE R 1/250, 1/500, 1/1,000 ~ 1/10,000.
7 . I ns t allation G ui d e l i n e s Camera Height • Consider camera height in distance calculation. • Sharper angles will alter the appearance of the plate. ( Shallow angles are recommended) 20˚ Camera Height (ft) 2.74 3.76 4.79 5.81 6.84 7.87 8.89 9.92 11.29 Horizontal Distance (ft) 7.52 10.34 13.16 15.97 18.79 21.61 24.43 27.
7 . I ns t allation G ui d e l i n e s Camera Angles • Vertical and horizontal angle must not exceed 20 degrees to achieve proper view of the license plate. H-angle < 20˚ V-angle < 20˚ V-angle less than 20˚correct H-angle less than 20˚correct • Both horizontal and veritical agles affect maximum capture distance. • Increasing eigther or both angels will decrease maximum capture distance. Ca p t u re Zone • Wider angles provide shorter capture distance. • Tele angles provide longer capture distance.
7 . I ns t allation G ui d e l i n e s L an e Width • • • • Narrow lanes = less variation in plate location. Wider lanes = more variation in plate location. Lens should cover entire width of the lane. Ensure horizontal field of view is wide enough. S p eed • Camera can capture moving vehicles up to 35mph. (SHUTTER Speed less than 1/500) • Keep camera as low as possible. • Minimize horizontal angle. • Zoom in the lens as close as possible.
7 . I ns t allation G ui d e l i n e s Tr ig g er • • • • Camera provides a trigger input is for freezing the video screen. Connect to external sensor e.g. Parking Gate Sensor. Trigger input should be pulled-up 3.3V DC in normal condition. Input line will be triggered when pull-up 3.3V DC drop to GND. DVR • Camera is fully compatible with industry standard DVRs. • Check compression settings. • For best results use non-conditional refresh compression. (i.e.
8 . S p e c ifications Signal Format NTSC Image Device PAL 1/3" Sony Super HAD CCDⅡ Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V) Inter. H/V H.Resolution 600TV Lines Minimum illumination 0 Lux (IR LED ON) S/N Ratio More than 50dB (AGC Off ) Sync System Internal Video Output 1.
9 . D i mensions 87.8 (3.47) unit: mm(inch) 82 (3.23) 145 (4.92) 120 (4.72) 224 (8.82) 7 (0.28) M12 XP 1.0 Ф3.5(Ф0.14) 2) 1.0 8 (Ф 120 ree deg 100 (3.94) 9 5. Ф2 ee gr 0 12 de Bottom of Bracket Ф65 (Ф2.
MEMO
M o unt G uide 3-ø5.
Ev e r Focus E lectro n i c s C o rp . Corporate Headquarters: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2-26982334 FAX: +886-2-26982380 www.everfocus.com.tw marketing@everfocus.com.tw China Office: Room 609, Technology Trade Building, Shangdi Information Industry Base, Haidian District, Beijing, China 100085 TEL: +86-10-62973336~39 FAX: +86-10-62971423 www.everfocus.com.cn marketing@everfocus.com.cn U.S.
