Operating instructions

9. OSD MANUAL
3. WHITE BALANCE
: Enable user to represent the accurate white color by controlling the R,G,B level. Setting up
LEFT, RIGHT KEY on each menu.
- WB MODE
①
ATW : Enable user to trace the White Balance
automatically in the range of 2,300K~10,000K.
②
PUSH : Enable user to search for White Balance
automatically. In this mode, color temperature range is
broader than ATW.
③
PUSH LOCK : Enable user to x the White Balance
according to the color temperature in the certain
environment.
④
MANUAL : Enable user to sets the White Balance
according to the circumstance.
- RED CONTROL
:
In the MANUAL setting of WB MODE, enable user to set the RED GAIN.
- BLUE CONTROL
: In the MANUAL setting of WB MODE, enable user to set the BLUE GAIN.
- PUSH AUTO
: In the PUSH LOCK setting of WB MODE, enable user to x the White Balance in
camera setting.
- INITIAL
: Enable user to reset the WHITE BALANCE menu setting..
4. BLC
: Use the condition which Image doesn’t gure out with BLC such as place surrounded windows
and lobby. Set the BLC using the LEFT, RIGHT KEY on the each menu.
- ATR MODE
: In this mode, the brightness of a single image is
compensated using the gamma curve.
- ATR LEVEL
: Enable user to set ATR Level(0~4 level).
- BLC(Back Light Compensation)
①
OFF : BLC mode off.
②
ON : BLC mode on.
③
HLC : High Light Compensation Mode on.
*High Light Compensation (HLC)
is a function that improves the visual recognition of
license plates and other such objects by suppressing or masking strong light sources (such as
the headlights of automobiles).
19
WHITE BALANCE
>WB MODE AUTO
RED CONTROL - - -
BLUE CONTROL - - -
PUSH AUTO - - -
INTIAL
RETURN
BLC
>ATR MODE ON
ATR LEVEL 4
BLC MODE ON
BLC ZONE CENTER
BLC LEVEL 8
INTIAL
RETURN