User`s manual

EZN Plus Series
37
7.4 Video
The settings relating to video such as streaming, camera OSD can be configured on this page. The
"Video" page has five tabs: Multi-streaming, Camera, Advanced, ROI and Privacy Mask.
7.4.1 Multi Streaming
【Installed Certificate Information】This IP camera can output three video streams simultaneously.
For each of these streams, the user can set the compression format, resolution, bit rate, and frame
rate individually. Stream 1 is always enabled for live view. To enable Stream 2 and/or Stream 3,
check the “Enable” box the header of each stream.
Note: If you connect to the camera via the Internet and experience a delay (lag time) in the
video feed, try to reduce the number of streams and the quality and resolution of the streams –
but keep the frame rate at its maximum.
Format: Select the encoding format – H.264 or MJPEG.
Resolution: Select the most suitable resolution for your needs.
Frame Rate: Select from 1 to 30 fps.
Bit Rate: If required, select whether you want the stream to stream a Constant Bit Rate or a
Variable Bit Rate, and set the values of whichever option you choose.
Click Apply to apply the setting changes or Reset to reset without saving the changes.