User`s manual

 EZNPlusSeries
64

8. UpgradingFirmwareUsingIPUtility
YoucanupgradetheFirmwareusingtheIPUtilitysoftwareincludedinthesoftwareCD.

1. InstallandthenstarttheIPUtility .Thefollowingdialogboxappears.

2. ClickFindDevicestosearchthecamerasconnectedintheLAN.Thedefaultnetworkvaluesof
thecameraswillbedisplayed.Bydefault,thenetworkprotocolofthecameraisDHCP.
3. SelectacameraandthenclickLogin/MultiLogintologinthecamera.

4. TypetheuserIDandpassword.ClickOK.

Note:
1. ThedefaultuserIDisuser1andthedefaultpasswordis11111111.
2. IfyouselectmorethanonecamerathathasthesameuserID/password,youwillbeable
tologinseveralcamerasatonce.



