User`s manual

35
Issue: 1.0
Alarm Inputs 4 NO/NC programmable trigger inputs; programmable relative priority of alarms
Alarm Output Form “C” relay rated at 12VDC/1A
Alarm Actions Go to preset, pattern, scan or tour; optional programmable duration of 3~60 seconds
Other Actions On inactivity of 1~60 minutes, go to preset position, pattern, scan or tour
RS-485 Protocols Supported EVF-1, Pelco-P, Pelco D
RS-485 Baud Rate
2400~38,400
RS-485 Addressing
Address range 00~99
Power Supply
24VAC (+/- 10% nominal)
2.5A capacity recommended (heater on); 1A recommended (heater off)
Power Consumption ~850mA heater off; ~1.8A heater on
Power Input Surge Protection Built in
Dimensions
Body diameter 6.55”; height with wall arm 10”
Clear bubble diameter 4.7”
Projection from rear with wall arm 13.4” (10.2” to center line of dome)
Weight PTZ unit: 4.9 lbs; included EPH-WMB wall mount arm: 2.8 lbs.
Total in wall mount configuration: 7.7 lbs.
Operating Temperature -40°C~50°C ; -40°F~122°F (heater on below ~30°F)
Environmental IP66 weather resistant
Mounting Provision Wall mount arm included
Certifications FCC, CE, HDcctv Alliance Base-Line Compliance