Instruction Manual EN-7522C 22” Wide Screen TFT-LCD Monitor
Please read this manual thoroughly before use, and keep it handy for future reference. SAFETY INSTRUCTION ………………………………………………………………….. 2~3 CAUTIONS ……………………………………………………………….......................... 4 FCC RF INTERFERENCE STATEMENT ……………………………........................... 5 CONNECTING WITH EXTERNAL EQUIPMENT ………………………………………. 6 REMOTE FUNCTIONS …………………………………………………………………… 7 CONTROLS AND FUNCTIONS ………………………………………………………….. 8 ~ 41 MOUNTING GUIDE ………………………………………………………………………..
INSTRUCTION MANUAL ……………………………………………………………………. 1 Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped. 2 …………………………………………………………………….
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance(servicing) instructions in the literature accompanying the appliance. INSTRUCTION MANUAL …………………………………………………………………….
NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moisture. This unit is designed to be used in the office or home. Do not subject the unit to vibrations, dust of corrosive gases. KEEP IN A WELL VENTILATED PLACE Ventilation holes are provided on the cabinet to prevent the temperature from rising.
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
A. BOTTOM PANEL CONTROL 1 2 3 4 5 6, 7 8 9 10 11 12 13 14 1. VIDEO2(AV2) OUT 2. VIDEO2(AV2) IN 3. VIDEO1(AV1) OUT 4. VIDEO1(AV1) IN 5. TRIGGER INPUT 6, 7. AUDIO IN(R+L) for AV1, AV2 and S-VIDEO 8. S-VIDEO(Y/C) IN 9. AUDIO OUT(Speaker) 10. PC STEREO IN 11. VGA(D-SUB) IN 12. DVI IN 13. HDMI IN 14. DC 12V IN 6 …………………………………………………………………….
B. REMOTE CONTROLLER(Option) 1. POWER( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/HDMI/DVI/PC) sources. 3. AUTO Auto geometry adjustment in PC Source. 4. HOLD Stop the Trigger & Auto switching functions. 5. MUTE Mute the sound. 6. MENU Activates and exits the On Screen Display. 7. EXIT Exit the On Screen Display. 8. VOL( ) Increases or decreases the level of audio volume. 9. UP/DOWN Move to OSD menu. 10.
C. FRONT KEY CONTROL 1 2 3 4 5 6 7 8, 9 1. SOURCE/ Select PC or video. Select On Screen Display menu. 2. MENU/EXIT Activate and exit the On Screen Display. 3, 4. AUTO/▼, ▲ These buttons allow user to enter the sub-menu of the activated function. The up(▲) button is HOLD function and stop the Trigger & Auto switching functions. 5, 6. VOL Adjust the volume and menu settings. 7. POWER ON/OFF( / I ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 8.
8 ……………………………………………………………………. INSTRUCTION MANUAL OSD MENU DESCRIPTION A: Custom Menu (Only Video Input) 1) Press the MENU button and then press the up(▲) or down(▼) button to select the Custom. 2) Press the up(▲) or down(▼) button to select the sub menu. 3) Press the left(◀) or right(▶) button to adjust the picture setting. 4) Press the MENU button to save. Brightness: Increase or decrease the intensity of the image. Contrast: Increase or decrease the intensity (lightness or dimness) of the image.
INSTRUCTION MANUAL ……………………………………………………………………. 9 A: Custom Menu (For RGB-PC & HDMI Input) 1) Press the MENU button and then press the up(▲) or down(▼) button to select the Custom. 2) Press the up(▲) or down(▼) button to select the sub menu. 3) Press the left(◀) or right(▶) button to adjust the picture setting. 4) Press the MENU button to save.
10 ……………………………………………………………………. INSTRUCTION MANUAL B. Picture / Sound Menu (Only Video Input) 1.
1) Press the MENU button and then press the up(▲) or down(▼) button to select the Picture / Sound. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Picture Mode. 4) Press the right(▶) or SOURCE/ button. 5) Press the up(▲) or down(▼) button to select the Picture Mode option.
INSTRUCTION MANUAL ……………………………………………………………………. 11 2-1. Color Tone 1) Press the up(▲) or down(▼) button to select the Color Tone. 2) Press the right(▶) or SOURCE/ button.
3) Press the right(▶) or SOURCE/ button again. 4) Press the up(▲) or down(▼) button to select the Color Tone option. 5) Press the MENU button to save. 12 ……………………………………………………………………. INSTRUCTION MANUAL 2-2.
1) Press the up(▲) or down(▼) button to select the User. 2) Press the MENU button. 3) Press the up(▲) or down(▼) button to select the User option. 4) Press the left(◀) or right(▶) button to adjust the Red, Green or Blue setting. 5) Press the MENU button to save.
INSTRUCTION MANUAL ……………………………………………………………………. 13 3. Mute 1) Press the up(▲) or down(▼) button to select the Mute. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save.
14 ……………………………………………………………………. INSTRUCTION MANUAL 4. Volume 1) Press the up(▲) or down(▼) button to select the Volume 2) Press the left(◀) or right(▶) button to adjust Volume setting. 3) Press the MENU button to save.
INSTRUCTION MANUAL ……………………………………………………………………. 15 5. Size 1) Press the up(▲) or down(▼) button to select the Size 2) Press the right(▶) or SOURCE/ button.
3) Press the up(▲) or down(▼) button to select the Size option. 4) Press the MENU button to save. 16 ……………………………………………………………………. INSTRUCTION MANUAL 6.
1) Press the up(▲) or down(▼) button to select the NR. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save.
INSTRUCTION MANUAL ……………………………………………………………………. 17 7. 3D Comb 1) Press the up(▲) or down(▼) button to select the 3D Comb. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save.
18 ……………………………………………………………………. INSTRUCTION MANUAL B. Picture / Sound Menu (For RGB-PC & HDMI Input) 1. Size 1) Press the up(▲) or down(▼) button to select the Size. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Size option.
INSTRUCTION MANUAL ……………………………………………………………………. 19 2. PC (Only RGB-PC Input) 1) Press the up(▲) or down(▼) button to select the PC.
2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the PC sub menu. 4) Press the right(▶) or SOURCE/ button. 5) Press the left(◀) or right(▶) button to adjust the PC setting. 6) Press the MENU button to save. Auto Adjust: Auto geometry adjustment. Phase: Adjust the number of horizontal picture elements. H-Position: Move image horizontally on screen right or left. V-Position: Move image vertically on screen up or down.
1) Press the MENU button and then press the up(▲) or down(▼) button to select the PIP. 1. PIP 1) Press the right(▶) or SOURCE/ button. 2) Press up(▲) or down(▼) button to select the On or Off. 3) Press the MENU button to save.
INSTRUCTION MANUAL ……………………………………………………………………. 21 2. Input Source 1) Press the up(▲) or down(▼) button to select the Input Source. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Source option. 4) Press the MENU button to save.
Main Sub RGB PC or HDMI RGB PC or HDMI 22 ……………………………………………………………………. INSTRUCTION MANUAL 3. PIP Mode 1) Press the up(▲) or down(▼) button to select the PIP Mode. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the PIP Mode option. 4) Press the MENU button to save.
※ PBP1 Main Sub image image ※ PBP2 Main Sub image image INSTRUCTION MANUAL ……………………………………………………………………. 23 4.
1) Press the up(▲) or down(▼) button to select the Size. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Size option. 4) Press the MENU button to save.
24 ……………………………………………………………………. INSTRUCTION MANUAL 5. Position 1) Press the up(▲) or down(▼) button to select the Position. 2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Position option. 4) Press the MENU button to save. ※ RB: Right of Bottom, LB: Left of Bottom, LT: Left of Top & RT: Right of Top.
INSTRUCTION MANUAL ……………………………………………………………………. 25 6. Swap 1) Press the up(▲) or down(▼) button to select the Swap. 2) Press the right(▶) or SOURCE/ button to swap the main image for the sub one.
26 ……………………………………………………………………. INSTRUCTION MANUAL 7. Sound Select 1) Press the up(▲) or down(▼) button to select the Sound Select.
2) Press the right(▶) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Sound Select option. 4) Press the MENU button to save. INSTRUCTION MANUAL ……………………………………………………………………. 27 D.
1) Press the MENU button and then press the up(▲) or down(▼) button to select the Setup. 1. Reset 1) Press the right(▶) or SOURCE/ button 2) Press the right(▶) or SOURCE/ button again. 3) Press SOURCE/ button to execute the reset. Reset: All settings go to the factory initialization. 28 …………………………………………………………………….
2. Language 1) Press the up(▲) or down(▼) button to select the Language. 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select language. 4) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
3. OSD Tone 1) Press the up(▲) or down(▼) button to select the OSD Tone. 2) Press the right( ) or SOURCE/ button 3) Press the up(▲) or down(▼) button to select the OSD Tone option. 4) Press the MENU button to save. 30 …………………………………………………………………….
4. Blue Screen 1) Press the up(▲) or down(▼) button to select the Blue Screen. 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
5. Key Lock 1) Press the up(▲) or down(▼) button to select the Key Lock. 2) Press the right( ) or SOURCE/ button 3) Press the up(▲) or down(▼) button to select the On or Off 4) Press the MENU button to save. 32 …………………………………………………………………….
6. Trigger 1) Press the up(▲) or down(▼) button to select the Trigger. 2) Press the right( ) or SOURCE/ button. 6-1. Trigger Enable 1) Press the up(▲) or down(▼) button to select the Trigger Enable. 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the Menu button to save. INSTRUCTION MANUAL …………………………………………………………………….
6-2. Trigger Input 1) Press the up(▲) or down(▼) button to select the Trigger Input . 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Trigger Input option. 4) Press the Menu button to save. 34 …………………………………………………………………….
6-3. Buzzer 1) Press the up(▲) or down(▼) button to select the Buzzer. 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the On or Off. 4) Press the Menu button to save. INSTRUCTION MANUAL …………………………………………………………………….
6-4. Trigger Time 1) Press the up(▲) or down(▼) button to select the Trigger Time. 2) Press left( ) or right( ) button to adjust Trigger Time setting. 3) Press the MENU button to save. 36 …………………………………………………………………….
6-5 Trigger Option 1) Press the up(▲) or down(▼) button to select the Trigger Option. 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Trigger Option setting. 4) Press the Menu button to save. N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is high(2~5[V]), Trigger function is activated.
6-6. Display Type 1) Press the up(▲) or down(▼) button to select the Display Type. 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Display Type option. 4) Press the Menu button to save. PIP & FULL: When the condition is below, the Trigger Input image will be displayed as PIP. Main Trigger Input Video Video Video RGB PC or HDMI RGB PC or HDMI Video Otherwise, it will be displayed as full screen.
7. Auto switching 1) Press the up(▲) or down(▼) button to select the Auto switching. 2) Press the right( ) or SOURCE/ button. 7-1. Auto switching On/Off 1) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the On or Off . 4) Press the Menu button to save. INSTRUCTION MANUAL …………………………………………………………………….
7-2. Auto switching Input enabled 1) Press the up(▲)or down(▼) button to select the Inputs enabled. 2) Press the right( ) or SOURCE/ button. 3) Press the up(▲) or down(▼) button to select the Input. 4) Press the right( ) or SOURCE/ button. 5) Press the up(▲) or down(▼) button to select the On or Off. 6) Press the Menu button to save. 40 …………………………………………………………………….
7-3. Auto switching Time 1) Press the up(▲) or down(▼) button to select the Time. 2) Press the left( ) or right( ) button to adjust the Time setting. 3) Press the MENU button to save. INSTRUCTION MANUAL …………………………………………………………………….
Using the VESA standard wall mount design and the 100×100mm hole pattern on the back panel to install the LCD monitor to the wall. Wall-mount Installation (Option) 1. The Monitor fixing bracket to the monitor using the fixing screws provided. 2.
42 ……………………………………………………………………. INSTRUCTION MANUAL ▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ ACCESSORIES 1. Power cord 2. Power adaptor 3. User’s manual 4. PC cable 5. Trigger cable (Option) 6. Stereo cable (Option) 7. Remote controller (Option) 8. Batteries (Option) 9.
INSTRUCTION MANUAL ……………………………………………………………………. 43 This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync signal. This monitor enters an appropriate mode through identifying each of the three modes of the signaling system.
44 ……………………………………………………………………. INSTRUCTION MANUAL 22” 22˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.282(H) x 0.282(V) BRIGHTNESS: 300cd/㎡(Typical) LCD-Type CONTRAST RATIO: 1000:1(Typical) VIEWING ANGLE: 160°/160°(H/V) RESPONSE TIME: 5msec(Typical) RESOLUTION (H x V) FREQUENCY 1680X1050@60Hz HORIZONTAL: 31~80KHz, VERTICAL: 56~75Hz VIDEO(2ch input 1.
ACTIVE DISPLAY AREA (H x V) 473.76 mm X 296.1 mm (18.65” X 11.65”) PACKING DIMENSIONS (W x D x H) 650 mm X 205 mm X 545 mm (25.59” X 8.07” X 21.45”) Net Weight : 5.83kg (12.83 Ibs) WEIGHT ELECTRICAL RATINGS Gross Weight : 8.42kg (18.52 Ibs) DC 12V / 5.83A ▶▶ NOTE : Technical specifications are subject to change without notice. INSTRUCTION MANUAL …………………………………………………………………….
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Taiwan - Headquarter Office China - Beijing Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Room 609,Technology Trade Building.