User's Manual

5. INSTALLATION
(Plastic Dome)
1. Attach the Low Pro le Dome on the ceiling using the screws provided. Considering the camera
angle required for the viewing angle.
2. Adjust the Lens Angle to the desired location.
3. Connect the Service Video Output Cable and check the video image. Change the Settings accordingly
using the OSD Controller.
4. After adjusting the Lens, install the Top Cover.
10
TAPPING SCREW (4 x 20L) - 3EA
TOP HOUSING
(Assembly direction)
TOP HOUSING
(Direction of Separation)
ASSEMBLY HOOK
(2 point)
M4 STAR SCREW
L-WRENCH(T-20)
SERVICE VIDEO TEST CABLE
OSD CONTROLLER
<TILT ANGLE : 20~90°>
TILT: +90°
TILT: 0°
TILT: +20°
PAN: ±10°
PAN: 0°
<PAN ANGLE : ±10°>