User Manual

H.265 VANGUARD II Series

3.5.2.3 UTC Control

Click UTC to enter the UTC Control panel. On this panel, you can display the analog camera

OSD menu and configure the camera OSD settings.

Note: For EverFocus’ PTZ cameras, only the UTC-supported PTZ cameras support the UTC

function.

Select a channel

Click to enter the UTC control panel

Select a Protocol

Operation Keys

To perform the UTC Control function:

1. Select a camera and then select UTC1 or UTC2 from the Protocol drop-down list.

2. Click the button, the camera OSD menu will be displayed.

3. You can use the Up / Down / Left / Right buttons to select among the OSD menu items

and use as the Enter button to enter the setup menu.