Instructions / Assembly

3. Each tree section is numbered with a tag. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and insert it into the

assembled stand.Make sure the pole is firmly inserted and secured into the stand.

5.Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all

wires are free of branch hinges.

7. (For pre-lit trees only) Connect the light strings as per the color labels indicated in Fig. B and insert

green label plug into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or

flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in

order to maintain the performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from

the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)

9. After shaping the entire tree following the previous step, slig

htly upsweep all b

ranch tips for a uniform

look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from

Polygroup®! Carefully follow the instructions below

on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

Top view

Side view

Fig. C

ASSEMBLY INSTRUCTIONS

MADE IN CHINA

Section 2

Section 1

Insert

Green Label

Plug Into Wall

Outlet

MODEL #: TG4000FNIC05

Assemble

Red Labels

Together

*Electrical Rating For The Tree

(For Indoor Use Only)

0.51A 120V 60Hz

Fig. B - Tree and Light Assembly

Insert and slide the legs

upward into the slots of the

base until firmly secured.

Fig. A - Tree Stand Assembly

PAGE 1
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly and easily set up your new tree. 1. Before you start to assemble your tree, choose an appropriate location near a wall outlet. 2. Assemble the tree stand and place on a level surface. (See Fig. A) Fig. A - Tree Stand Assembly Insert and slide the legs upward into the slots of the base until firmly secured. *Electrical Rating For The Tree (For Indoor Use Only) 0.51A 120V 60Hz Fig.
PAGE 2
1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord from the wall outlet and then disconnect light extension cord between each section of the tree. 2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section below and fold all branches toward the pole. 3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in both directions.