MSDS

MATERIAL SAFETY AND DATA SHEET
Evergreen Labs, Inc.
4 West Rees Avenue
Walla Walla, WA. 99362
Emergency Telephone: [phone] MSDS Date 04/21/2010
PRODUCT NAME: WINE AWAY
Product SKU Numbers: 66002, 66009 , 66008, 66010, 66020, 66001, 66091, Test Kit
PRODUCT IDENTIFICATION
Active ingredient formula: C10H16
Chemical Name/Synonyms: 1-Methyl-4-(1-methylethenyl) cyclohexene
DOT Shipping Name: Non-Hazardous (not regulated)
DOT Hazard Class: Non-Hazardous
PHYSICAL DATA (TYPICAL)
Appearance: Opaque White Liquid
Odor: Mild Citrus
Density: (Air = 1): N/A
Solubility in Water: Soluble
Flash Point: none below 100C
Boiling Point: Above 100C
Freezing Point: 0.0 C
pH: 9.23 @ 21.5 C
V.O.C. 2.3% – 2.4% by weight
HAZARDOUS INGREDIENTS
Components %
NONE AT THIS TIME
FIRE AND EXPLOSION DATA
Flash Point: None below 100C
Flammability Limits: Not applicable
Extinguishing Media: Water fog, Carbon Dioxide, foam, dry chemical
Special Firefighting procedures: None
REACTIVITY DATA
Stability: Stable
Incompatibility: Strong Oxidizing Agents
Hazardous Decomposition Products: Carbon Monoxide and Carbon Dioxide
HEALTH HAZARD DATA
Acute Effects: Not tested. Low toxicity expected based on components.
Irritant Effects: Possible mild skin irritant.
Sensitization Effects: Not tested but none expected.
Carcinogenic Potential: None expected based on components.
Other health effects: None known.
SPILL LEAK AND DISPOSAL PROCEDURES
:
Important: Before responding to a spill or leak of this product, review each section of
this MSDS. Follow the recommendations given in the handling precautions sections.
Check the Fire and Explosion Data section to determine if the use of non-sparking
tools is merited. Insure that spilled or leaked product does not come in contact with
materials listed as incompatible. If irritating fumes are present, consider evacuation
of enclosed areas.
Spills: Initially minimize area effected by the spill or leak. Based on the products
toxicological chemical properties, and on the size and location of the spill or leak,
assess the impact on contaminated environments (e.g. water systems, ground air
equipment, etc.). Recover as much pure product as possible into appropriate
containers. Large spill or leak residuals may have to be collected and disposed of.
Clay, soil, or other available absorbent may be used to recover any material that can
not readily be recovered as pure product.
EMERGENCY AND FIRST AID INSTRUCTIONS
Eye exposure: Flush with clean cool water for 15 minutes.
Skin Exposure: If irritation occurs, wash with soap and water. Contact a physician if
irritation persists.
REGULATORY STATUS INFORMATION
DOT Shipping: Non-Hazardous
NPCA/HMIS Ratings: Health 1; Flammability 1; Reactivity 0
Prepared by: Evergreen Labs Compliance Dept.
4 West Rees Ave., Walla Walla, WA 99362 [phone]
The information contained on this MSDS has been checked and should be accurate
and reliable as of the date of the MSDS. It is the responsibility of the user to comply
with all Federal, State, and Local laws and regulations. Any use of this product or
method or application which is not described in the product data sheet is the
responsibility of the user.