BT-MSOIII Bluetooth V5.0 Class1 Data Module Approval Sheet -1- Bluetooth® Module Customer MODEL BnCOM MODEL BT-MSOIII BPM610 History VERSION DATE DESCRIPTION 1.0 2019-11-27 Initial Release 작 성 검 토 승 인 작 성 검 토 승 인 빅솔론 ㈜비엔컴 Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module BT-MSOIII Specification Revision 1.0 2019/11/27 CONFIDENTIAL INFORMATION BnCOM Co.,Ltd. Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module List of Contents 1. General ...................................................................................................... 5 1.1 Overview ....................................................................................................................................... 5 1.2 Features ........................................................................................................................................ 6 1.3 Application ...............
BT-MSOIII Bluetooth V5.0 Class1 Data Module OEM/integrators Installation Manual the modules limited to OEM installation only the OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 1. General 1.1 Overview This specification covers Bluetooth module which complies with Bluetooth specification version5.0 and integrates RF & Baseband controller in small package. This Module has deployed Airoha AB1122 chipset. All detailed specification including pin outs and electrical specification may be changed without notice. Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 1.2 Features ■ Bluetooth® v5.0 (Dual mode) specification compliant ■ Radio includes integrated balun and typical RF performance of 8dBm transmit power and -94 dBm receive sensitivity ■ Embedded 80251 MCU with 12/24MHz clock rate ■ Embedded 4Mbit Flash ■ Serial interfaces: UART ■ 4 general purpose PIOs ■ Competitive Size: 28mm x 18mm x 2.8mm : 44Pin ■ Operating temperature range (MAX -30℃ ~ 85℃) 1.3 Application ■ Mobile Payment ■ POS System Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 1.4 Pin Configuration GND 46 45 GND 44 NC GND 3 43 GND GND 4 42 GND GND 5 41 NC GND 6 40 NC NC 7 39 GND nRESET 8 38 NC BT_STATUS 9 37 DEBUG_RX MODE_SEL 10 36 GND NC 11 35 DEBUG_EN NC 12 34 DEBUG_TX 3.3V 13 33 NC 3.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 1.5 Device Terminal Functions Function Pin Name Pin No.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 1.6 Package Dimensions & Land Pattern ● unit = mm ● General Tolerances = ±0.2mm 0.15 1.35 0.15 2.80 5.15 1.95 1.55 18.00 0.50 0.90 1.20 2.35 1.30 28.00 28.00 0.90 0.50 1.50 1.00 BT-MSOIII Dimensions Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 0.15 1.35 0.15 15.80 1.30 1.70 2.35 28.00 0.50 0.90 0.40 5.56 ANTENNA AREA 1.95 1.55 18.00 0.50 0.90 Land Pattern Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 2. Characteristics 2.1 Electrical Characteristics ■ Absolute Maximum Ratings Rating Min Max Unit Storage Temperature range VDD -40 -0.3 85 4.4 °C V ■ Recommended Operating Conditions Operating Condition Operating Temperature range VDD Min Typ Max Unit -30 2.7 20 3.3 85 3.6 °C V ■ Current consumption Classic (Test Condition : VDD =3.3V, Temp = 25°C) Avr Peak Unit - 9.2 7.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 2.2 RF Characteristics RF Specification Output transmit power Condition 2.402 2.441 2.480 Transmit power density Transmit power control Pmin Pst Frequency Range 20dB bandwidth for modulation Transmitter Adjacent channel transmit power Modulation characteristics Intial carrier frequency tolerance Carrier frequency drift Receiver Sensitivity at 0.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 2.3 Antenna Characteristics The antenna is monopole type of chip antenna. The antenna impedance matching is optimized for 1 mm ~ 2 mm mother board PCB thickness. The radiation pattern is impacted by the layout of the mother board. Typically the highest gain is towards GND plane and weakest gain away from the GND plane. ■ LOG, Smith Chart & VSWR ■ Radiation Gain Frequency [Mhz] Efficiency [%] Average Gain [dBi] Peak Gain [dBi] 2,400 52.15 -2.83 3.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 3. Terminal Description 3.1 UART Interface This is a standard UART interface for communicating with other serial devices. BT-MSOIII UART interface provides a simple mechanism for communicating with other serial devices using the RS-232 protocol. When BT-MSOIII is connected to another digital device, UART_RX and UART_TX transfer data between the 2 devices.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 4. Design Guide 4.1 ANT Placement Guide For antenna radiation, place the ANT area of the module on the outside of PCB Or apply a ‘Copper Keepout Area’ as shown. Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 5. Solder Profile The soldering profile depends on various parameters necessitating a set up for each application. The data here is given only for guidance on solder re-flow. There are four zones: 1. Preheat Zone - This zone raises the temperature at a controlled rate, typically 1-2.5°C/s. 2. Equilibrium Zone - This zone brings the board to a uniform temperature and also activates the flux.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 6. Package Information Revision 1.
BT-MSOIII Bluetooth V5.0 Class1 Data Module 7. Certification note. 7.1 FCC/IC FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BT-MSOIII Bluetooth V5.0 Class1 Data Module IC Information to User This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
