Instructions / Assembly

ManualsBrandsEverkem ManualsHeater Accessories10.1 oz Fire Block Fire-Rated Residential Caulk

Complies With:

IECC Section 402.1

IRC Section R602.8 Item 4

IRC Section R602.8.1.2

IBC Section 717.25

Meets ASTM-E136 Performance Criteria

Meets ASTM-E814 Performance Criteria

EcoSeal Standards:

V.O.C. Content: <1 g/l

LEED 2009 (EQ Credit 4.1): 1 point

NAHB Green Guidelines: 5 G.I. Points

Complies To:

Residential Fireblocking Caulk

Technical Data Sheet

Fire Seal

Product Description:

Standards & Speciﬁ cations:

Applications:

SCAQMD Rule #1168

OTC-Ozone Trans. Comm.

CARB

BAAQMD

Product Features

Tested To ASTM-E136

Tested To ASTM-E814

UL Classiﬁ ed

Red Color

Smooth Consistency

Excellent Adhesion

Low V.O.C. (<1 g/l)

Physical Properties:

1/2

EverKem Diversiﬁ ed Products

5180 Indiana Avenue Winston Salem, 27106

PH: 1.800.638.3160 / FX: 1.336.661.7969

www.everkemproducts.com

Fire Seal is chemically compatible with FlowGuardGold® and Corzan® pipe ﬁ ttings as well as all

PVC, CPVC, ABS, PEX tubing and other applicable tested penetrating items.

*Flowguard Gold, BlazeMaster, and Corzan are licensed trademarks to the Lubrizol Corporation

▪ Single family residential homes

▪ Non-rated ceiling and ﬂ oor openings

▪ Electrical, plumbing, and other mechanical penetrations

Tested To ASTM-E814

UL Classiﬁ ed

Red Color

Smooth Consistency

Excellent Adhesion

Low V.O.C. (<1 g/l)

Physical Properties:

Fire Seal is chemically compatible with FlowGuardGold® and Corzan® pipe ﬁ ttings as well as all

PVC, CPVC, ABS, PEX tubing and other applicable tested penetrating items.

Chemistry Silicate Mortar

Cure Type Water-Based

Color Brick Red

Physical Uncured State Glossy Paste

Physical Cured State Solid Mortar

Shelf Life 12 Months

Tack Free Time 10 Minutes at 75°F

Cure Time 48 to 72 Hours at 75°F

Flame Spread 0

Smoke Development 0

Freeze - Thaw Stability Excellent - 5 Cycles

Odor Odorless

Weight / Gallon 14 lbs. / gal

V.O.C. Level < 1 gram / liter

Fire Seal is a noncombustible caulking compound used to ﬁ ll the

annular space around vents, pipes, ducts, cables, and wires at

ceiling and ﬂ oor level in non-rated one and two-family residential

construction.Fire Seal-136 is designed to seal penetrations to

resume the integrity of ﬁ reblocks within concealed stud wall cavities

to prevent the free passage of draft, ﬂ ame, smoke, and toxic gasses.

Summary of content (2 pages)

PAGE 1
Fire Seal Residential Fireblocking Caulk Technical Data Sheet Product Description: Fire Seal is a noncombustible caulking compound used to ﬁll the annular space around vents, pipes, ducts, cables, and wires at ceiling and ﬂoor level in non-rated one and two-family residential construction.Fire Seal-136 is designed to seal penetrations to resume the integrity of ﬁreblocks within concealed stud wall cavities to prevent the free passage of draft, ﬂame, smoke, and toxic gasses.
PAGE 2
Fire Seal Residential Fireblocking Caulk Technical Data Sheet Application Procedures: 1. 2. 3. 4. 5. Clean area to be protected so that it is clean of wood shavings, dust particles, and other debris. When encountering large voids, mineral or rock wool batts should be used as backing material. Cut the cartridge nozzle to the desired bead width. Fill the void or annular space with product to a depth of no less than one inch.