Instructions / Assembly

1-800-476-7366
|
[e-mail]
|
WWW.EVERLASTCLIMBING.COM
© 2014 EVERLAST CLIMBING, A PLAYCORE COMPANY
HOME CLIMBING WALL INSTALLATION INSTRUCTIONS
8
ELECTRIC DRILL
PHILLIPS BIT
1-3/4” SCREWS
C. INSTALLATION OF CLIMBING PANELS
1. Working from bottom to top, left to right, you will now install the panels
for your climbing wall. Align the left side of a panel with the left side of
the left most 2’’ x 4’’. SEE FIGURE 13a.
2. Level the Panel. Sink (1) #8 1-3/4’’ screws through the panel into the
2’’ x 4’’using your drill with the Phillips head drill bit.
3. Secure the panel to the (4) sub wall boards using (1) #8 screw every
12’’.
4. For multiple panels, repeat the previous steps for the remaining panels.
SEE FIGURE 13b.
5. Congratulations! Your climbing wall is now installed and you are ready to
add the finishing touches to it.
LEVEL
CLIMBING PANEL INSTALLATION FIGURE 13a
CLIMBING PANEL INSTALLATION FIGURE 13b