Instructions / Assembly

1-800-476-7366

INFO@EVERLASTCLIMBING.COM

WWW.EVERLASTCLIMBING.COM

HOME CLIMBING WALL INSTALLATION INSTRUCTIONS

Care & Maintenance

The proper care and maintenance of your climbing wall is essential and is

your responsibility. Inspect your climbing wall, its components and protective

surfacing on a regular basis. These inspections should include, but are not

limited to the lists that follow.

SURFACE

• Panels should be installed according to installation instructions.

• Check panels to make sure they are in good condition and show no

signs of damage.

• Check each panel’s adherence to the wall. Tighten only when they are

loose. Do not overtighten!

• Check for sharp points and edges.

• Remove or repair any damaged wall areas.

HAND HOLDS

• Hand Holds should be mounted according to installation instructions.

• Observe holds for signs of stress or breakage.

• Remove and replace any damaged holds.

• Check hand holds for looseness and tighten. Do not overtighten!

• Wash hand holds periodically to remove oils, stains and other residue.

Use mild soap and water with a soft bristle brush. Towel dry washed

holds then air dry for 24 hours to ensure complete drying.

Note: Hand Holds are also dishwasher safe!

• Inspect climbing routes for unsafe maneuvers. Make sure all routes

are reviewed carefully before they are climbed.

MATS

• Mats should be used for traverse climbing activities only.

• Mats are not to be used as tumbling, crash or landing mats.

• Inspect mats for damage and proper positioning before use.

• Check mats for tears, soft spots, separation of foam and fatigue

(failure to perform adequately).

• Remove defective mats immediately and adjust activity accordingly.

• Mats should extend 6’ from all climbing surfaces.

• Never place objects on mats while people are climbing.