Instructions / Assembly

1-800-476-7366
|
[e-mail]
|
WWW.EVERLASTCLIMBING.COM
© 2014 EVERLAST CLIMBING, A PLAYCORE COMPANY
HOME CLIMBING WALL INSTALLATION INSTRUCTIONS
1
• Please read instructions in their entirety prior to beginning
installation.
• These assembly instructions are based on engineering
that was designed to support the loading requirements per
the Climbing Wall Association (CWA) Standard, 2009. This
specification requires that bouldering walls be designed to
support a climber load of 270 lbs or a uniform distribution
load of 15 psf, whichever is greater.
• It is up to you to determine that the stud wall is of sound
structural condition. Everlast Climbing assumes no
responsibility for the structural condition of the stud wall.
• For a copy of the engineering for the attachment method of
this product, please call 1.800.476.7366.
• 2x4 lumber purchased at a store usually exceed 8’. Be sure
to trim them down if necessary.
• If necessary, use touch-up paint to paint the visible edges of
the 2x4 lumber. Map out the sub wall prior to installation.
NOTE: These instructions show how to build a both an 8’ H x 4’ L and
a 8’ H x 12’ L climbing wall (3 panels). Modifications need to be made
for walls of differing length.
PLEASE READ CAREFULLY BEFORE ASSEMBLING & USING PRODUCTS