SDS

ManualsBrandsEverlast ManualsBuilding materialsPhillips 1-1/4" x 8' Metal Corner Bead

SAFTEY Data Sheet (SDS)

Section 1 – Identification

Product identifier: Coated Steel Sheer – Carbon Steel

Other means of product use: Metal Drywall accessories, Studs< metal Lath, and Plaster Accessories

Synonym: Cold rolled sheet, H.D.G. (Hot Dipped Galvanized)

SDS#: 52115

Supplier’s details: Phillips Manufacturing Company

4949 South 30th Street

Omaha, NE 69107

402-339-3800

www.phillipsmfg.com

Emergency Telephone #: 800-822-5055

Section 2 – Hazard(s) Identification

2(a) Classification of the Chemical: As sold this product, is considered an article under Reach regulation (Reach Regulation EC) No 1907/2006 and

is not subject to classification under CLP regulation (REGULATION (ec) no 1272/2008. However, Coated Steel Sheet is not exempt as an article

under OSHA’s Hazard Communication Standard (29 CFR 1910.1200) due to its downstream use, thus this product is considered a mixture and a

hazardous material. Therefore, the categories of Health Hazards as defined in GLOBALY HARMAONIZED SYSTEM OF CLASSIFICATION AND

LABELING OF CHEMICALS (GHS), Third revision edition ST/SG/AC.10/30/Rev. 3” United Nations, New York and Geneva 2009 have been evaluated.

Refer to section 3, 8 and 11 for additional information.

2(b) Signal Word, Hazard statements(s), symbols and precautionary statement(s):

Hazard Symbol

Hazard Classification

Signal Word

Hazard Statement(s)

Carcinogenicity – 2

Reproductive Toxicity – 2

Single Target Organ

Toxicity (STOT) Repeat Exposure - 1

Danger

 Suspected of causing cancer

 Suspected of damaging fertility or the

unborn child.

 Causes damage to the lungs and central

nervous system through prolonged or

repeated inhalation exposure

 Harmful if swallowed

 May cause an allergic skin reaction.

 Harmful in contact with skin

 May causes eye irritation

Acute Toxicity-Oral – 4

Skin Sensation – 1

STOT Single Exposure - 3

Eye Irritation-2B

Precautionary Statement(s):

2(c) Hazards not otherwise classified: Unknown 2(D) Unknown acute toxicity statement (mixture): None Known

Prevention

Response

Storage/Disposal

Do not breathe dusts / Fumes / Gas /Mist /

Vapor / sprat. Wear protective gloves /

protective clothing / eye protection / face

protection. Contamination work clothing must

not be allowed out of the work place. Use only

outdoors or in well ventilated areas. Wash

thoroughly after handling. Obtain special

instructions before use. Do not handle until all

safety precautions have been read and

understood. Do not eat, drink or smoke when

using this product.

If inhaled: Remove person to fresh air and

keep comfortable for breathing.

If exposed: concerned or feel unwell: Get

medical advice / attention.

If in eyes: Rinse cautiously with water for

several minutes. Remove contacts lenses, if

present and easy to do. Continue Rinsing.

If on skin: Wash with plenty of water. If

irritation or rash occurs: Get medical advice /

attention. Take off and wash contaminated

clothing before reuse. Call a poison center if

feeling unwell

\All steel associated with this category can be

and should be recycled. If material is not to be

recycled dispose of in accordance with federal,

state and local regulations.

Summary of content (9 pages)

PAGE 1
SAFTEY Data Sheet (SDS) Section 1 – Identification Product identifier: Coated Steel Sheer – Carbon Steel Other means of product use: Metal Drywall accessories, Studs< metal Lath, and Plaster Accessories Synonym: Cold rolled sheet, H.D.G. (Hot Dipped Galvanized) SDS#: 52115 Supplier’s details: Phillips Manufacturing Company 4949 South 30th Street Omaha, NE 69107 402-339-3800 www.phillipsmfg.
PAGE 2
SAFTEY Data Sheet (SDS) Section 3 – Composition/Information on Ingredients 3(a-c) Chemical name, common name (synonyms), CAS n umber and other identifiers, and concentration Chemical name CAS Number EC Number % weight Iron Manganese Nickel Silicon 7439-89-6 7439-96-5 7440-02-0 7440-21-3 231-096-4 231-105-1 231-111-4 231-130-8 95 - 99.9 0.5 - 2.0 0.004 – 0.5 0.001 – 1.
PAGE 3
SAFTEY Data Sheet (SDS) Section 4 – First-aid Measures 4(A) Description of necessary measures:  Inhalation Coated Steel Sheet as sold/shipped is not a likely form of exposure. However, during further processing (welding, grinding, burning, ect.), if inhaled: remove person to fresh air and keep comfortable for breathing, If exposed, concerned, or feel unwell seek medical attention.  Eye Contact: Coated Sheet Steel as sold/ shipped is not likely form of exposure.
PAGE 4
SAFTEY Data Sheet (SDS) Nickel Silicon 1.0 mg/m3 (as Ni metal & insoluble compounds) 15 mg/m3 (total dust, PNOR6) 5.0 mg/m3 (as respirable fractions , PNOR) 1.5 mg/m3 (as inhalable fraction3 Ni metal) 0.2 mg/m3 (as inhalable fraction Ni inorganic only insoluble and soluble compounds) 10 mg/m3 0.015 mg/m3 (as Ni metal & insoluble and soluble compounds) 10 mg/m3 (as total dust) 5.
PAGE 5
SAFTEY Data Sheet (SDS) Section 9 Physical and Chemical Properties 9(a) Appearance (physical state, color, etc.
PAGE 6
SAFTEY Data Sheet (SDS) b. c. No skin (Dermal) irritation data available for Coated Steel Sheet as a mixture or its components. No Eye Irritation data available for Coated Steel Sheet as a mixture. The following Eye Irritation information was found for the components:  Iron: Causes eye irritation.  Silicon: Slight eye irritation in rabbit protocol.  Nickel: Slight eye irritation from particulate abrasion only. d. No Skin (Dermal) Sensitization data available Coated Steel Sheet as a mixture.
PAGE 7
SAFTEY Data Sheet (SDS) Delayed (chronic) Effects by components:  Iron and Iron oxides: Chronic inhalation of excessive concentrations of iron oxide fumes or dusts may result in the development of a benign pneumoconiosis, called siderosis, which is observable as an x-ray change. No physical impairment of lung function has been associated with the siderosis. Inhalation of excessive concentrations of ferric oxide may enhance the risk of lung cancer development in workers exposed to pulmonary carcinogens.
PAGE 8
SAFTEY Data Sheet (SDS) Regulations Concerning the International Carriage of Dangerous Goods by Road (ADR) does not regulate Coated Steel Sheet as a Hazardous material.
PAGE 9
SAFTEY Data Sheet (SDS) Other Regulations: WHMIS Classification (Canadian): The product, Coated Steel Sheet is not listed as a whole. However, individual components are listed.