Specification
Process: AC/DC GTAW-P , DC SMAW Output: TIG 5-350A DC; 10-350A AC Sck 20-270A DC Duty Cycle@ 40° C: TIG 35% @350A/Sck 35% @270A
Input@ 240V 1ph: I1MAX: 47A I1EFF: 29A Sck E6010 Rated: Yes VRD for Sck: Yes<24V
OCV: 80V Standard Pulse: .5-500Hz Sck Hot Start Time/Intensity/Arc Force: Yes
TIG AC Frequency: 20-250Hz TIG AC Balance: 5-90% Advanced AC Pulse (mixed): .1-9.9 Hz
Pre/Post Flow: 0-25/50 Seconds Start/End Amps DC/AC: 5/10-350A Up/Down Slope: 0-25 Seconds
Weight: 83 Lbs. (38Kg) Dimensions: 11.5”Wx25”Hx25”L Input Cable Length: 9.5’ (3m)
PowerTIG 350EXT
1-877-755-9353
www.everlastwelders.com
All specicaons, accessories and opons are subject to change without noce.
Everlast Power Equipment
380 Swift Ave. Unit 12
South San Francisco, CA 94080
AC/DC Digital TIG Series
► Get it done with the more power, up to 350A.
► Weld like a pro with 4 Types of AC wave form control.
► Save up to 9 user defined programs for future use.
► Weld over 1” thick aluminum with Advanced AC Pulse.
► Keep at it with 35% duty cycle @ 350A.
► Tackle thin or thick metals with low current starting.
► Go pedal free with 2T/4T torch sequencer if desired.
Will you ever need more? We don’t think so.
Are you in the 99.9%?
Chances are, you are one of those customers that weld within a standard range of metal thicknesses which range from light gauge sheets to
heavy 1” plate. If you are, this welder can tackle about anything you throw at it and keep doing so for quite some me without taking a break
with 60% duty cycle at 280A and 35% duty cycle at full power. AC wave form control helps improve weld performance and can be used to
customize your weld feel and look. The intuive feature rich panel guarantees you that you will be able to customize about anything you
need in a few seconds without having to go through a maze of hidden menus or programs. It can be “nested” with the all new PowerCool 400
cooler and new PowerCart which are both designed specically for this unit to make a neat and dy package. Even though it has specically
designed accessories, this unit is sll portable enough that it can be carried to where it is needed. And due to its 240V single phase operang
capability, there is praccally no place the machine cannot be connected for service.
Are you in the .1%?
If you are, don’t feel le out though. Before you cross this unit o your list due to not meeng your needs, keep an open mind. The Ad-
vanced AC Pulse control can increase your weld performance greatly on aluminum and turn this unit into a real power house. The Advanced
AC Pulse mixes AC output with DC output to increase penetraon on Aluminum, without loosing cleaning ability. Tesng has shown that pen-
etraon can easily exceed 1.5” with this feature when properly setup with pure Argon. Now that sounds a bit high doesn’t it? Well we know
it does, but customers connually remark about how surprised they are that our claims hold up. When Helium is added to the mix, the num-
ber goes even higher. Other features like AC balance and Pulse frequency can be manipulated to control heat spread and arc width as well.
But if you are into DC, and need to weld anything else other than aluminum, this unit really doesn’t disappoint. The fully adjustable standard
pulse (which can be used in AC as well) cycles up to 500Hz for perfect control of wet-in and heat spread. The ability to weld thin metal is not
forgoen with it’s low amp start capability of 5 amps (DC).
Specifications
ORDER PUBLICATION: 30970-ETL FEB ‘19