Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED 650nm 1204 48mcd 20mA

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.2 Page: 1 of 7

Device No. : DSE-121-027 ECN :

Technical Data Sheet

Chip LED with Right Angle Lens

12-21SDRC/S530-XX/TR8

Features

˙Package in 8mm tape on 7〞diameter reel.

˙Compatible with automatic placement equipment.

˙Compatible with infrared and vapor phase reflow

solder process.

˙Mono-color type.

Descriptions

˙The 12-21 SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

˙Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

˙Automotive: backlighting in dashboard and switch.

˙Telecommunication: indicator and backlighting in

telephone and fax.

˙Flat backlight for LCD, switch and symbol.

˙General use.

Device Selection Guide

Chip

Material Emitted Color

Lens Color

AlGaInP

Super Deep Red

Water Clear

Summary of content (7 pages)

PAGE 1
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Right Angle Lens 12-21SDRC/S530-XX/TR8 Features ˙Package in 8mm tape on 7〞diameter reel. ˙Compatible with automatic placement equipment. ˙Compatible with infrared and vapor phase reflow solder process. ˙Mono-color type. Descriptions ˙The 12-21 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
PAGE 2
EVERLIGHT ELECTRONICS CO.,LTD. 12-21SDRC/S530-XX/TR8 Package Outline Dimensions Notes: Tolerances Unless Dimension ± 0.1mm , Angle± 0.
PAGE 3
EVERLIGHT ELECTRONICS CO.,LTD. 12-21SDRC/S530-XX/TR8 Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Symbol *Chip Rank Min. Typ. Max.
PAGE 4
EVERLIGHT ELECTRONICS CO.,LTD. 12-21SDRC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-121-027 ECN : http://www.everlight.com Rev. 1.
PAGE 5
EVERLIGHT ELECTRONICS CO.,LTD. 12-21SDRC/S530-XX/TR8 Reliability Test Items And Conditions Test Sample Ac/Rc Hours/Cycles Size No. Items Test Condition 1 Solder Heat Temp. : 260℃± 5℃ 5 Sec. 76 PCS. 0/1 Temperature Cycle H : +85℃ 30min ∫ 5 min L : -55℃ 30min 50 Cycles 76 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 50 Cycles 76 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 76 PCS. 0/1 Temp. : -55℃ 1000 Hrs. 76 PCS.
PAGE 6
EVERLIGHT ELECTRONICS CO.,LTD. 12-21SDRC/S530-XX/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of Temperature and RH are : 5℃~35℃, RH60%. 2.2 Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent.
PAGE 7
EVERLIGHT ELECTRONICS CO.,LTD. 12-21SDRC/S530-XX/TR8 Rework 1. Customer must finish rework within 5 sec under 245℃. 2. The head of iron can not touch copper foil. 3. Twin-head type is preferred. ○ × EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-121-027 ECN : Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Rev.