Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED White 180mcd 0603

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2008-09-20 00:15:56.0

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.2 Page: 1 of 12

Device No. : DSE-199-W01 Prepared date: 04-Mar-2008 Prepared by: Ashley Kuo

Technical Data Sheet

0603 Package Chip LED (0.2mm Height)

19-219/T3D-AQ2R2TY/3T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

․The product itself will remain within RoHS

compliant version.

Descriptions

․The 19-219 SMD LED is much smaller than lead

frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Part No.

Material

Emitted Color Resin Color

19-219/T3D-AQ2R2TY/3T

InGaN

Pure White Yellow Diffused

Summary of content (12 pages)

PAGE 1
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0603 Package Chip LED (0.2mm Height) 19-219/T3D-AQ2R2TY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version.
PAGE 2
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Package Outline Dimensions 0.8 1.6 Polarity 0.2±0.05 Recommend soldering pad 0.35 0.75 0.75 0.70 0.70 0.65 Cathode 0.75 0.35 0.70 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-199-W01 Prepared date: 04-Mar-2008 Revision :2 LifecyclePhase: Rev.2 Page: 2 of 12 Prepared by: Ashley Kuo Release Date:2008-09-20 00:15:56.
PAGE 3
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 95 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec.
PAGE 4
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Bin Range Of Luminous Intensity Bin Min Max Q2 90 112 R1 112 140 R2 140 180 Unit Condition mcd IF=5mA Bin Range Of Forward Voltage Group Bin Min Max 28 2.60 2.70 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 T Unit Condition V IF=5mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Device No.
PAGE 5
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Chromaticity Coordinates Specifications for Bin Grading Group Bin Code 1 2 3 A 4 5 6 CIE_x CIE_y Condition 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.314 0.314 0.334 0.334 0.314 0.314 0.334 0.334 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 0.282 0.315 0.343 0.311 0.315 0.347 0.376 0.343 IF= 5mA Notes: 1.The C.I.E.
PAGE 6
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T CIE Chromaticity Diagram Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-199-W01 Prepared date: 04-Mar-2008 Revision :2 LifecyclePhase: Rev.2 Page: 6 of 12 Prepared by: Ashley Kuo Release Date:2008-09-20 00:15:56.
PAGE 7
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C Forward Current IF (mA) Relative luminous intensity (%) 100 75 50 25 0 400 500 600 700 40 30 25 20 10 0 2.6 800 Wavelength λ (nm) Relative luminous intensity (%) Relative luminous intensity (%) 100 10 1000 4.2 4.
PAGE 8
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-199-W01 Prepared date: 04-Mar-2008 Revision :2 LifecyclePhase: Rev.2 Page: 8 of 12 Prepared by: Ashley Kuo Release Date:2008-09-20 00:15:56.
PAGE 9
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-199-W01 Prepared date: 04-Mar-2008 Revision :2 LifecyclePhase: Desiccant Label Rev.2 Page: 9 of 12 Prepared by: Ashley Kuo Release Date:2008-09-20 00:15:56.
PAGE 10
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp.
PAGE 11
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
PAGE 12
EVERLIGHT ELECTRONICS CO.,LTD. 19-219/T3D-AQ2R2TY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered.