Datasheet

ManualsBrandsEverlight Electronics ManualsLEDsSMD LED 1204 Green-Yellow / Red G 575nm, R 639nm

LifecyclePhase:

Revision : 1

Expired Period: Forever

Release Date:2008-09-20 00:16:11.0

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 12

Device No. : SZDSE-232-A14 Prepared date:19-Mar-2007 Prepared by :duang jing fen

Technical Data Sheet

Chip LED (Multi-Color)

23-22B/R7G6C-A30/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Multi-color type.

․Pb-free.

․The product itself will remain within RoHS compliant version.

Descriptions

․The 23-22B SMD Taping is much smaller than

lead frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Type Material

Emitted Color Resin Color

R7 AlGaInP Dark-Red

G6 AlGaInP Brilliant Yellow Green

Water Clear

Summary of content (12 pages)

PAGE 1
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED (Multi-Color) 23-22B/R7G6C-A30/2T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Multi-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version.
PAGE 2
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Package Outline Dimensions Green - + - + 0.8 0.8 1.6 Cathode Mask Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-232-A14 Prepared date: 19-Mar -2007 :1 LifecyclePhase: Rev. 1 Page: 2 of 12 Prepared by :duang jing fen Release Date:2008-09-20 00:16:11.
PAGE 3
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Peak Forward Current (Duty 1/10 @1KHz) IFP R7:60 G6:60 mA Power Dissipation Pd R7:60 G6:60 mW Electrostatic Discharge(HBM) ESD R7:2000 G6:2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
PAGE 4
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Viewing Angle Peak Wavelength Dominant Wavelength Symbol Iv Typ. Max. R7 18.0 ----- 72.0 G6 14.5 ----- 45.0 ----- 130 ----- deg ----- nm 631 ---- nm 573 ---- 2θ1/2 λP R7 G6 λd R7 G6 Spectrum Radiation △λ Bandwidth VF Forward Voltage Reverse Current Min. IR ----------- R7 ----G6 639 575 20 20 ----- R7 1.7 2.0 2.4 G6 1.7 2.0 2.
PAGE 5
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Bin Range Of Luminous Intensity R7 Bin Min Max 1 18.0 28.5 2 28.5 45.0 3 45.0 72.0 Bin Min Max 1 14.5 18.0 2 18.0 28.5 3 28.5 45.0 Unit Condition mcd IF=20mA Unit Condition mcd IF=20mA G6 Notes: 1.Tolerance of Luminous Intensity ±11% Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-232-A14 Prepared date: 19-Mar -2007 :1 LifecyclePhase: Rev.
PAGE 6
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Typical Electro-Optical Characteristics Curves R7 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-232-A14 Prepared date: 19-Mar -2007 :1 LifecyclePhase: Rev. 1 Page: 6 of 12 Prepared by :duang jing fen Release Date:2008-09-20 00:16:11.
PAGE 7
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Typical Electro-Optical Characteristics Curves G6 Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-232-A14 Prepared date: 19-Mar -2007 :1 LifecyclePhase: Rev. 1 Page: 7 of 12 Prepared by :duang jing fen Release Date:2008-09-20 00:16:11.
PAGE 8
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-232-A14 Prepared date: 19-Mar -2007 :1 LifecyclePhase: Rev. 1 Page: 8 of 12 Prepared by :duang jing fen Release Date:2008-09-20 00:16:11.
PAGE 9
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-232-A14 Prepared date: 19-Mar -2007 :1 LifecyclePhase: Label Rev. 1 Page: 9 of 12 Prepared by :duang jing fen Release Date:2008-09-20 00:16:11.
PAGE 10
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Ac/Re Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp.
PAGE 11
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
PAGE 12
EVERLIGHT ELECTRONICS CO.,LTD. 23-22B/R7G6C-A30/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered.