Datasheet

ManualsBrandsEverlight Electronics ManualsOptical DetectorsFork coupler 2.1mm 30V 940nm

Everlight Electronics Co., Ltd. http:\\www.everlight.com Rev

：

Page

：

1 of 7

Device No

：

CDRX-810-010 Prepared date

：

2006/12/29 Prepared by

：

Kunjiang Xie

Technical Data Sheet

Opto Interrupter

ITR8010

█

██

█

Features

․Fast response time

․High analytic

․Cut-off visible wavelength λp=940nm

․High sensitivity

․Pb free

․This product itself will remain within RoHS compliant version

█ Descriptions

․The ITR8010 consist of an infrared emitting diode and an NPN silicon phototransistor,

encased side-by-side on converging optical axis in a black thermoplastic housing,

․The phototransistor receives radiation from the LED only .This is the normal situation.

․But when an object is in between , phototransistor could not receives the radiation.

․For additional component information , please refer to IR and PT.

█

██

█ Applications

․Mouse Copier

․Switch Scanner

․Floppy disk driver

․Non-contact Switching

․For Direct Board

█

██

█ Device Selection Guide

Device Selection Guide Device Selection Guide

Device Selection Guide

Device No. Chip Material LENS COLOR

IR GaAlAs Water clear

PT Silicon Water clear

Summary of content (7 pages)

PAGE 1
Technical Data Sheet Opto Interrupter ITR8010 █ Features ․Fast response time ․High analytic ․Cut-off visible wavelength λp=940nm ․High sensitivity ․Pb free ․This product itself will remain within RoHS compliant version █ Descriptions ․The ITR8010 consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing, ․The phototransistor receives radiation from the LED only .This is the normal situation.
PAGE 2
ITR8010 █ Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.2mm 3.Lead spacing is measured where the lead emerge from the package 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent 6.
PAGE 3
ITR8010 █ Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Power Dissipation at(or below) 25℃ Free Symbol Ratings Unit Pd 75 mW Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current (*1) Pulse width ≦100μs, Duty cycle=1% IFP 1 A Collector Power Dissipation Pc 75 mW Collector Current IC 20 mA Collector-Emitter Voltage B VCEO 30 V Emitter-Collector Voltage B VECO 5 Operating Temperature Topr -25~+85 V ℃ Storage Temperature Tstg -40~+85 ℃ Tsol 260 ℃ Air
PAGE 4
ITR8010 █ Typical Electrical/Optical/Characteristics Curves for IR Fig.1 Forward Current vs. Ambient Temperature Fig.2 Spectral Distribution 70 100 60 80 50 IF=20mA Ta=25°C 60 40 40 30 20 20 10 0 0 -40 -20 0 Fig.3 20 40 60 80 100 Peak Emission Wavelength Fig.4 vs. Ambient Temperature Forward Current vs. Forward Voltage 10 980 960 10 4 3 940 10 2 920 900 -25 1 10 0 50 25 75 0 100 Fig.5 Forward Current vs Ambient Temperature(°C) 1 2 3 4 Fig.
PAGE 5
ITR8010 █ Typical Electrical/Optical/Characteristics Curves for PT Fig.1Collector Power Dissipation vs. Ambient Temperature Fig.2 Spectral Sensitivity 100 1.0 80 0.8 60 0.6 40 0.4 20 0.2 Ta=25 C 0 0 -25 25 0 50 75 85 100 Fig.3 Relative Collector Current vs. Ambient Temperature 100 300 500 700 900 1100 1300 Fig.4 Collector Current vs. Irradiance 160 100 2 140 C 120 10 100 80 1 60 40 0.1 20 0 0 10 20 30 40 50 60 0.01 0.5 70 1.5 1 3 2 Fig.5 Collector Dark Current vs.
PAGE 6
ITR8010 █ Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item 1 Solder Heat Test Condition TEMP : 260℃ ± 5 ℃ H : +100 2 ℃ Temperature 5 min Cycle ℃ H : +100℃ 4 5 High Temperature Storage Low Temperature ℃ TEMP. : -40 ℃ ℃ DC Operating VCE=5V Life 7 IF=20mA High 85 Temperature / High Humidity Ee≦L×0.
PAGE 7
ITR8010 Packing Quantity Specification 1. 80PCS/1Plate,6Plates/1Boxe, 10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference ITR8010-F LOT No: Lot Number Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2.