EVERLIGHT ELECTRONICS CO.,LTD. DATA SHEET PART NO. DATE ： ： DEPARTMENT： REVISION 12-215/BHC-AN1P2/3C ： R.D.3 1.3 RECEIVED ■MASS PRODUCTION □ PRELIMINARY □ CUSTOMER DESIGN DEVICE NUMBER : DSE-125-B01 PAGE : 12 CUSTOMER DESIGNER JESSICA CHANG REV CHECKER APPROVER JEFF TSAI CHARLES CHANG DESCRIPTION RELEASE DATE OFFICE : NO 25,Lane 76,Chung Yang Rd,Sec.3 Tucheng, Taipei 236, Taiwan, R.O.C. TEL : 886-2-2267-2000,2266-9936 ( 22 Lines ) FAX : 886-2-2267-6189 http://www.everlight.
!" ! " !"# $ %& '%& &%& '%& ( &%& '%& )( %& &&%& %& &*%& +%& * &*%& # )%& &,%& )%& & %& '%& &)%& '%& ( ,&%& # 2< 0
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Right Angle Lens 12-215/B C Series *1 Features ˙Package in 8mm tape on 7〞diameter reel. ˙Compatible with automatic placement equipment. ˙Compatible with infrared and vapor phase reflow solder process. ˙Mono-color type. Descriptions ˙The 12-215 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series Package Outline Dimensions CL 0.6 CL 1.7 ± 0.2 2.1 ± 0.2 0.5 1.0 ± 0.2 R0.5 1.5 0.5 2.2 Cathode mark 0.9 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-125-B01 Prepared date: 07-23-2003 Rev. 1.
EVERLIGHT ELECTRONICS CO.,LTD.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series Electro-Optical Characteristics (Ta=25℃) Part No. Parameter Symbol Min. Typ. 12-215/B3C λp Peak Wavelength ---- 468 12-215/BLC 465 12-215/BHC 468 12-215/B1C 466 12-215/B3C λd 12-215/BLC ---- nm ---- nm 460 12-215/BHC 470 12-215/B1C IF=20mA 65 26 Spectrum Radiation Bandwidth △λ ---- ---- nm 130 ---- deg 3.5 4.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B 12-215/B C C Series Series Explain Of Luminous Intensity: IF=20mA Part No. 12-215/B1C-M1N2 12-215/B3C-M1N2 12-215/BLC-L2N1 12-215/BHC-N1P2 12-215/BHC-N2P2 12-215/BHC-P1Q1 Parameter Luminous Intensity Luminous Intensity Luminous Intensity Luminous Intensity Luminous Intensity Luminous Intensity Symbol Typ. Iv Iv Iv Iv Iv Iv 28 26 20 40 55 65 Bin Code Min. Max. Unit M1 18.0 22.5 M2 22.5 28.5 N1 28.5 36.0 N2 36.0 45.0 M1 18.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B 12-215/B C C Series Series Explain Of Luminous Intensity: IF=10mA Part No. 12-215/BHC-LN 12-215/BHC-MN Parameter Luminous Intensity Luminous Intensity Symbol Typ. Iv Iv 22 30 Bin Code Min. Max. Unit L 11.5 18.0 M 18.0 28.5 N 28.5 45.0 M 18.0 28.5 N 28.5 45.0 mcd mcd IF=5mA Part No.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-125-B01 Prepared date: 07-23-2003 Rev. 1.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Taping Quantity: 3000pcs Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-125-B01 Prepared date: 07-23-2003 Rev. 1.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series Carrier Tape Dimensions Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-125-B01 Prepared date: 07-23-2003 Desiccant Rev. 1.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 240℃±5℃ 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.
EVERLIGHT ELECTRONICS CO.,LTD. 12-215/B C Series 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng,Test TaipeiItems 236, Taiwan, Reliability AndR.O.
