Datasheet

ManualsBrandsEVERLIGHT OPTO ManualsLEDs & AccessoriesSMD LED Non-standard Green-yellow 16 mcd 130 ° 20 mA 2 V

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1.0 Page: 1 of 9

Device No.: DSE-125- Prepared date: 08-03-2004 Prepared by: Kenny Wang

Technical Data Sheet

Chip LED with Right Angle Lens

12-215UYC/S530-A2/TR8

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Mono-color type.

․Pb-free.

Descriptions

․The 12-215 SMD Taping is much smaller than lead frame

type components, thus enable smaller board size,

higher packing density, reduced storage space and

finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Automotive: backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Part No.

Material Emitted Color

Lens Color

12-215UYC/S530-A2/TR8 AlGaInP Super Yellow Water Clear

Summary of content (9 pages)

PAGE 1
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Chip LED with Right Angle Lens 12-215UYC/S530-A2/TR8 Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. Descriptions ․The 12-215 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
PAGE 2
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Package Outline Dimensions CL 0.6 CL 1.7 ± 0.2 2.1 ± 0.2 0.5 1.0 ± 0.2 R0.5 1.5 0.5 2.2 Cathode mark 0.9 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1.0 Page: 2 of 9 Device No.
PAGE 3
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Electrostatic Discharge ESD 2000 V Power Dissipation Pd 60 mW IFP 60 mA Peak Forward Current (Duty 1/10 @1KHz) 260 ℃ (for 5 seconds) Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ.
PAGE 4
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1.0 Page: 4 of 9 Device No.
PAGE 5
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1.0 Page: 5 of 9 Device No.
PAGE 6
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.1.0 Page: 6 of 9 Device No.
PAGE 7
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs.
PAGE 8
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.
PAGE 9
EVERLIGHT ELECTRONICS CO.,LTD. 12-215UYC/S530-A2/TR8 Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.