Datasheet

ManualsBrandsEVERLIGHT OPTO ManualsLEDs & AccessoriesSMD LED 0402 Red 36 mcd 120 ° 25 mA 2 V

EVERLIGHT ELECTRONICS CO., LTD.

MODEL NO:

16-213SURC/S530-A2/TR8

Device Number

：

DSE-163-005 REV. 1.0

0402 Package Chip LEDs

ECN

：

Page: 1/8

█

██

█

Features

：

：：

：

Package in 8mm tape on 7

〞

diameter reel.

Compatible with automatic placement equipment.

Compatible with infrared and vapor phase reflow

solder process.

Mono-color type.

█

██

█

Descriptions

：

：：

：

The 16-213 SMD Taping is much smaller than

lead frame type components, thus enable smaller

board size, higher packing density, reduced

storage space and finally smaller equipment to be

obtained.

Besides, lightweight makes them ideal for

miniature applications, etc.

█

██

█

Applications

：

：：

：

Automotive: backlighting in dashboard and switch.

Telecommunication: indicator and backlighting in telephone and fax.

Flat backlight for LCD, switch and symbol.

General use.

Chip

Material Emitted Color

16-213SURC/S530-A2/TR8

AlGaInP

Hyper Red

Water Clear

Office:

TEL:

FAX:

http:

NO. 25, Lane 76, Sec. 3, Chung Yang Rd., Tucheng 236, Taipei, Taiwan, R.O.C.

886-2-2267-2000, 2267-9936

886-2-2267-6244, 2267-6189, 2267-6306

//www.everlight.com

■

■■

■

Notes

：

：：

：

Tolerances Unless Dimension

0.1mm

Angle

0.5

Unit = mm

Lens ColorPART NO

█

██

█

Package Dimensions

：

：：

：

Summary of content (8 pages)

PAGE 1
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： DSE-163-005 REV. 1.0 Page: 1/8 ECN： █ Features：： █ Package Dimensions：： ! Package in 8mm tape on 7〞diameter reel. ! Compatible with automatic placement equipment. ! Compatible with infrared and vapor phase reflow solder process. ! Mono-color type.
PAGE 2
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： ECN： ■ Package Dimensions：： ■ Loaded quantity per reel 3000 pcs/reel：： DSE-163-005 REV. 1.
PAGE 3
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： DSE-163-005 REV. 1.
PAGE 4
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： DSE-163-005 REV. 1.
PAGE 5
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： ECN： ■ Typical Electro-Optical Characteristic Curves DSE-163-005 REV. 1.
PAGE 6
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： ECN： DSE-163-005 REV. 1.0 Page: 6/8 ■ Test Circuit R LED ■ Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage time 2.1 The operation of temperature and R.H. are : 5℃~35℃, R.H.60%. 2.2 Once the package is opened, the products should be used within a week.
PAGE 7
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： ECN： DSE-163-005 REV. 1.0 Page: 7/8 ■ Soldering heat reliability ( DIP ) Please refer to the following figure : ■ Soldering Iron Basic spec is ≦5 sec when 260℃.If temperature is higher, time should be shorter (+10℃ → -1sec). Power dissipation of iron should be smaller than 15 W , and temperature should be controllable. Surface temperature of the device should be under 230 ℃. ■ Rework 1.
PAGE 8
EVERLIGHT ELECTRONICS CO., LTD. MODEL NO: 16-213SURC/S530-A2/TR8 0402 Package Chip LEDs Device Number： ECN： ■ Reflow Temp / Time：： to rise preheat ■ Thickness of tin paste：： cooling DSE-163-005 REV. 1.