Datasheet

5 www.fairchildsemi.com
MV53164, MV54164, MV57164 Rev. 1.0.0
MV53164, MV54164, MV57164 Yellow, High Efficiency Green, High Efficiency Red Bargraph Displays
Filter Recommendations
For optimum ON and OFF contrast, one of the following filters or equivalents may be used over the lamp:
MV53164 MV54164 MV57164
Panelgraphic Yellow 25 or Amber 23 Panelgraphic Green 48 Panelgraphic Red 60
Homalite 190—1720 or 100—1726 Homalite 100—1440 Green Homalite 100—1605
In situations of high ambient light, a neutral density filter can be used to achieve greater contrast:
Panelgraphic Grey 10 Panelgraphic Grey 10
Homalite 100—1266 Grey
Notes
1. The average Luminous Intensity is obtained by summing the Luminous Intensity of each segment and dividing by
the total number of segments. The standard of measurement is the Photo Research Corp. “Spectra” Microcandela
Meter (Model IV-D) corrected for wavelength. Intensity will not vary more than ±33.3% between all segments within
a unit.
2. Leads immersed to 1/16 inch (1.6 mm) from the body of the device. Maximum unit surface temperature is 140°C.
3. All units are categorized for Luminous Intensity. The Intensity category is marked on each part as a suffix letter to
the part number.
4. For flux removal, Freon TF, Freon TE, isoproponal or water may be used to their boiling points.