Installation Guide

FOR INSTALLATION INTO DRYWALL:

• Hammer • 1-1/2" Finish Nails

• Caulking Gun • 2-1/2" Drywall Screws

• Stud Finder • Drywall Anchors (optional)

• Level • Construction Adhesive (i.e. Liquid Nails)

• Power Drill • Wood Filler

• Drill Bit 3/32" • Phillips Head Screwdriver

FOR INSTALLATION INTO MASONRY / BRICK:

• Hammer • Phillips Head Screwdriver

• Caulking Gun • 1-1/2" Finish Nails

• Stud Finder • 2-1/2" Masonry Screws and Drill Bits

• Level • Construction Adhesive (i.e. Liquid Nails)

• Power Drill • Wood Filler

• Drill Bit 3/32"

READ ALL INSTRUCTIONS AND REVIEW DIAGRAMS

BEFORE BEGINNING THE INSTALLATION TO GET A

THOROUGH UNDERSTANDING OF THE PROCESS.

SAFETY NOTICES

Always practice safety and use appropriate eye, ear,

and respiratory protection when using power tools.

Do not put heavy weight on mantel (over 20 pounds is not recommended). Do not let children

climb on or pull on the mantel. Check local re code and instruction from manufacturer of the

replace insert or stove for proper clearance between any wood mantel surface and rebox

opening (typically 12"). Evermark, LLC

cannot be held responsible for the incorrect installation of

the mantel shelf and/or leg/skirt kit.

MATERIALS REQUIRED

WARNING: Cancer and Reproductive Harm www.P65warnings.ca.gov